烧嘴炉用英语怎么说,烧嘴炉的英文翻译


词语导航

基本信息

词语:烧嘴炉

繁体:燒嘴爐

拼音:shāo zuǐ lú

英语翻译

【化】 burner

分词翻译

烧的英语翻译:

bake; burn; burning; carbonado; cook; cremation; fever; grill; heat; roast
set sth. on fire
【化】 burning

嘴的英语翻译:

mouth; nib
【医】 beak; nozzle; rostra; rostrum

炉的英语翻译:

furnace; kiln; stove
【医】 furnace

翻译例句

1. 介绍了国产化四烧嘴侧面对置式气化炉和单烧嘴顶置式气化炉的基本结构和工艺特点。

The basic configurations and process characteristics are presented of a localized laterally opposite four-burner gasifier and a top single-burner gasifier.

2. 根据发生炉煤气的特性,采用强制预混燃烧方式,设计了点火器的喷嘴、引射器及烧嘴,并对稳定火焰的方法也进行了研究。

This paper explained the design of nozzles, injectors and burner cones of new ignition with producer gas on forced pre-mixing and the method of flame stability.

3. SW钙土平焰炉头是一款烧嘴混合过量空气炉头,辐射加热设计。

The SW Sidewinder Flat Flame burner is a nozzle mix excess air burner designed for radiation heating.

4. 选用高速烧嘴及脉冲燃烧技术可以使热处理炉获得较精确的温度控制及较高的炉温均匀性。

Applying high velocity burners and pulse combustion control system, it is possible to get accurate temperature control and even distribution of temperature of furnaces.

5. 烧嘴混合炉头具有短焰,宽范围,非常稳定燃烧的特点。

The NOZZLE MIX burners feature short flames, wide turndown ranges and very stable combustion.

6. 本文结合2号炉改造过程中对蓄热式烧嘴控制逻辑的研究,提出了蓄热式烧嘴控制逻辑的新思路。

The paper combine the control logic research of regenerative burner in the process of no. 2 Furnace"s retrofit and introduces innovative thought for the control logic research of regenerative burner.

7. 通过对烧嘴结构、材质、安装等方面进行研究、改造,达到延长气化炉烧嘴使用寿命的目的。

By development and revamp of burner structure, material and installation, etc., the aim of prolonging burner service life was realized.

8. 在单烧嘴均热炉采用脉动火焰加热,根据模型实验结果,组织了工业试验。

The model test of jet angles was studied for impulse flame heating in top one-way fired pit.

9. 使用结果证明:对于单侧上烧嘴均热炉,辐射-对流组合式换热器有着明显的优越性。

The application results demonstrate that the combined radiation and convection recuperator has remarkable advantages for top one-way-fired soaking pits.

10. 目前,我国大多数单侧上烧嘴约热炉均采用顺流的辐射换热器。

Most of top one-way-fired soaking pits in China use parallel flow radiation recuperators now.wwW.WENTiyi.Com

11. 结合公司第一小型轧钢厂蓄热式烧嘴加热炉中修改造项目,介绍了蓄热式烧嘴加热炉的概况、燃烧系统的结构特点。

In accordance with the reform item of the heating furnace with regenerative burner in No. 1 small section steel rolling plant of Jinan Iron and steel Group co.

12. 可解决当前部分工业炉燃烧系统的升温速度要求快、炉型小、烧嘴分布过于密集等情况。

Can solve the part of the heating furnace combustion system requirements, the fast speed of small, burner graphically-intensive etc.

13. BZR是一种适合所有燃烧系统的燃气流量控制调节器,和比例混合器,内混烧嘴,正负炉压等一起使用。

The BZR is a precise gas flow control regulator for all combustion systems. Used with Proportional Mixers, Nozzle Mix Burners, positive or negative furnace pressures etc.

14. 指出了上部单烧嘴长坑均热炉的固有问题及改造方案;

The intrinsic problems found in the long top-fired soaking pit are discussed and the relevant modification schedule is raised herewith.

15. 轧钢加热炉的使用寿命一般为3 ~10年,锻钢室式加热炉的寿命约为2年,单侧上烧嘴均热炉的使用寿命一般为3 ~ 6年。

Generally, the steel rolling furnace"s service life is 3-10 years, the wrought steel chamber furnace is about 2 years, and the soaking pit side nozzle furnace"s is 3-6 years.

16. 轧钢加热炉的使用寿命一般为3 ~10年,锻钢室式加热炉的寿命约为2年,单侧上烧嘴均热炉的使用寿命一般为3 ~ 6年。

Generally, the steel rolling furnace"s service life is 3-10 years, the wrought steel chamber furnace is about 2 years, and the soaking pit side nozzle furnace"s is 3-6 years.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!