词语导航
基本信息
词语：安装孔
繁体：安裝孔
拼音：ān zhuāng kǒng
英语翻译
【化】 mounting hole; open holes
相关词条
1.mountinghole分词翻译
安装的英语翻译：
fit; fix; install【计】 erecting
【化】 setting
【经】 installation
孔的英语翻译：
aperture; bore; foramen; hole; os; ostium; vulva【化】 hole; opening
【医】 apertura; aperturae; aperture; bore; coel-; foramen; foramina; hiatus
mesh; opening; pore; Pori; porosity; porus; trema
翻译例句
1. 柴油机地脚螺丝安装孔灌上干河沙。
Fill the dried river fine sand into the foundation screw mounting holes of the diesel engine.
2. 冲洗并放净管道系统，然后安装孔板。
Flush and drain system and install orifice plates.
3. 箱体侧面预留销轴安装孔，安装精确。
Installed casing side reserved pin hole, accurate.
4. 箱底有四个安装孔供安装用。
At the tank bottom, there are four installation holes for installation.
5. 安装孔后墙面办公桌下安装。
Rear mounting holes for wall, under desk mounting.
6. 测量点取在安装孔的中心。
Measurement point is chosen from the center of the mounting hole.
7. 这两个模型提供了一个额外的双安装孔。
The twin model offers an additional pair of mounting holes.
8. 五个精机加工连接面箱体，预留安装孔。
Five fine machining junction surface casing, mounting holes are set aside.
9. 硅碳棒两端安装孔处的隙缝应用石棉绳堵塞。
The rifts at both installation holes of the silicon carbide rod ends shall be blocked by asbest rope.
10. 进水软管装入安装孔。
Insert Supply Hose into mounting hole.
11. 控制仪的外形图见图3，安装孔尺寸见图3。
Fig. 3 for installation hole size of the control device.
12. 如果你想让它更线性，提高冲击到顶部安装孔。
If you want it more linear, raise the shock up to the top mounting hole.
13. 模具板：精密机械与方便的工具附件的安装孔。
Tooling Plate: Precision machined with easy access mounting holes for tooling attachments.
14. 螺纹安装孔的位置与电装电机轴线成错开对称分布。
Screw hollow and motor spindle are distributed staggered and equally.
15. 灯具螺丝安装孔的螺纹能够保证安全地安装和拆除。
Threads intended to receive holding installation and removal of knurled headed screws.
16. 预抽头安装孔和一个空心轴允许各种不同的机器设计。
Pre-tapped mounting holes and a hollow-through shaft permit a variety of machine designs.
17. 如果你想要一个更进步的感觉，下降到最低安装孔的冲击。
If you want a more progressive feeling, drop the shock into the lowest mounting hole.
18. 将烘干后的细河沙放在柴油机旁，以便放入地脚螺丝安装孔内。
Put the dried river fine sand beside the diesel engine, so as to be conveniently filled into the foundation screw mounting holes.
19. 介绍一种中小型电动机机壳安装孔钻孔专用机具的设计和使用。
This paper introduces the design and application of the drilling machine of middle-sized and small -sized electromotor.
20. 非标定制说明：可按照颜色，亮度，长宽尺寸，安装孔位定制。
Bar light units can be customized by color, intensity, length, width and instillation position.
21. 用于平开铝门窗五金件安装孔槽的冲压；气动控制，工作稳定。
The machine is used for punch hardware holes of windows and doors and other holes or grooves in windows and doors.
22. 可按照角度，外径，内径，颜色，亮度，均匀性，安装孔位定制。
Ring lights can be designed by Angle, outer diameter, inner diameter, color, intensity, equality and instillation position.
23. 汽车轮毂PCD值是指螺栓安装孔的中心连接而成的截面圆的直径。
The Wheel PCD is the diameter of the studs from the centre of the wheel.
24. 产品有以下缺陷：水冷头上的安装孔没有螺纹，用配带的自攻螺丝安装非常困难。
there has no screw thread on the installation hole on head of water-cooling. It"s difficult to install it by the screw tap which along the products.
25. 可通过支架联结组装成三联体或二联体，支架上有用于固定的安装孔。
Assemble into a triad body or diad body through linked bracket which has mounting holes for fixing.
26. 本文简要介绍了一种钻削马鞍床身安装孔装置的设计原理、主要结构等。
The special drilling machine whose principle and construction were introduced was used to drill holes.
27. 所述的安装孔也可以根据要展示的物品的形状的不同而做成相应的形状。www.wENtIyi.cOm
The mounting holes can be made into different shapes according to the shapes of the display products.
28. 适用于汽车前后保险杠雷达安装孔的冲切，转向灯孔冲切，支架焊接等。
Suitable for punching installation holes of radar device on the automobile bumper, turn indication light installation holes and welding of supporting structure.
29. 随着偏心体安装孔距的增大破坏弯矩有所增大，连接刚性效率则显著增大。
With the increase of the mounting distance of eccentric house, the breaking bending moment increases, while the rigid efficiency increases obviously.
30. 随着偏心体安装孔距的增大破坏弯矩有所增大，连接刚性效率则显著增大。
With the increase of the mounting distance of eccentric house, the breaking bending moment increases, while the rigid efficiency increases obviously.
版权声明：问题易所有作品（图文、音视频）均来源网络，版权归原创作者所有，与本站立场无关，如不慎侵犯了你的权益，请联系我们告知，我们将做删除处理！