碳化过程用英语怎么说,碳化过程的英文翻译


词语导航

基本信息

词语:碳化过程

繁体:碳化過程

拼音:tàn huà guò chéng

英语翻译

【建】 carbonization process

分词翻译

碳化的英语翻译:

carbonization; carbonize
【化】 carbonation; carbonization; carbonizing
【医】 carbonization; carbonize

过程的英语翻译:

course; procedure; process
【计】 PROC
【化】 process
【医】 course; process
【经】 process

翻译例句

1. 讨论了碳化过程中的技术关键。

The key point in the carbonating process was discussed.

2. 并研究了碳化过程中,结构、性能与温度的依存关系。

The dependence of structure properties on temperature during carbonization were studied.

3. 探讨了包裹返碱现象发生的规律和碳化过程的化学理论基础。

The chemistry theoretical foundation of carbonation proc ess from the view that the diverse carbonation has a different controlling-step a…

4. 使用光学和电子显微镜技术研究了纤维在氧化和碳化过程中的形态学结构。

The morphological struture of the rayon fibers during oxidizing and carbonizing process has been examined using optical and electron microscope technique.

5. 在碳化过程中,毛织物由稀硫酸处理、烘干,然后升温直至不纯物质全部碳化。

In the carbonizing process, the wool cloth is treated with dilute sulfuric acid, dried, and then heated until the impurities are converted to carbon.

6. 采用循环碳化浸取制备轻质碳酸镁,对循环碳化过程进行了传质过程及动力学研究。

The mass transfer and kinetics on the preparation process of light magnesium carbonate by stream-recycling carbonation were studied.

7. 根据声化学的有关原理初步探索了超声场对于纳米级轻质碳酸钙合成碳化过程的影响。

Based on the theory of sonochemistry, the influence of ultrasound on the carbonation process of the synthesis of nanometer light calcium carbonate is studied initiatively.

8. 流变性能的影响,并分析了添加硫后的沥青碳化产物的X—射线衍射参数的变化及其碳化过程的机理。

The X-ray diffraction parameters of carbonization products and the mechanism of chemical reaction of pitch have been analyzed.

9. 针对纯碱碳化过程的复杂建模问题,提出基于T-S模型的自适应神经模糊推理系统(ANFIS)的建模方法。

The paper introduces a kind of adaptive neural-fuzzy inference systems (ANFIS) based on T-S model to deal with the modeling problem of the complex soda carbonization process.

10. 对石灰颗粒,单个煤球的碳化过程,以新观点解释了煤球碳化机理,研究了成型压力与煤球质量、碳化速率及预干燥的关系。

Based on the carbonization process of lime particles and individual piece of briquet, the carbonization mechanism of briquet is to be explained by new viewpoint.

11. 叫做碳化的另一种石化类型,发生在软组织以碳薄膜形式被保存下来的过程中。

Another type of fossilization, known as carbonization, occurs when soft tissues are preserved as thin films of carbon.

12. 通过多此加热使碳纤维保持在0.007微米的厚度,这个过程也叫做碳化。

This is carbonised by heating it in multiple stages to leave individual carbon fibres just seven microns (0.007 millimetres) thick.

13. 在高温烘烤过程中,棉纤维变成了碳纤维,后者再与硼溶液发生反应生成碳化硼。

The strips were later removed from the solution and heated in an oven. The heat changes the cotton fibers into carbon fibers, which react with the boron solution and produce boron carbide.

14. 层状碳化物不是时效过程中的产物。

Lamellar carbides are not formed during aging process.

15. 这样才能保证在烘焙过程中咖啡中所含的糖和其他碳水化合物碳化,从而产生出众所周知的咖啡油脂,产生出高质量、风格一致的好咖啡。

It is during the roasting process that the sugars and other carbohydrates within the bean become caramelized, creating a substance which is known as the coffee oil.

16. 球磨过程中,碳化物之间能够互相固溶,可以用于高能球磨制备碳化物及纳米复合材料的研究制备多元碳化物复合材料。

The solid solutions all were supersaturated and metastable , and would dissolve each other with further milling , which was available for the achievement of multi - carbide composite.

17. 本文研究了挤嵌碳化硅工艺过程和机理,并提出了一个理论挤嵌模型。

This paper makes a study of the process and mechanism of the technology and brings forward a theoretical impregnation model.

18. 在开机过程中,由于注塑件的脱模,碳化的物料混入白底座的注塑料内,造成了照片中的黑点。

During the starting process, due to the injection mould machine demoulding, carbonizing materials mixed into the injection materials of white base to form the blackspot in the picture.

19. 基底材料是首先受到加热过程称为碳化。

The base material is first subjected to a heating process called carbonization.

20. 对亚共晶白口铸铁经高温形变后所获得的碳化物在等温球化过程中球化长大进行了研究。

The spheroidizing grow, in isothermal spheroidizing process, of carbides formed from deformation under high temperature in, hypoeutectic white cast iron is studied.

21. 讨论了残留碳化物在球化过程中的作用。

The action of the residual carbides during the spheroidizing annealing was discussed.

22. 用此方程“预报”碳化物均匀性和“控制”工艺过程,取得了良好效果。

"Predicting" the carbide homogeneity and "controlling" the technological processes has got a very good results.

23. 凹模在使用过程中,由于交变载荷的作用,使碳化物的棱角处应力集中出现裂纹,最终导致凹模开裂。

The crack appears at the edge angle due to stress concentration caused by alternating load, which finally leads to the fissuring of die plate.

24. 炉管服役过程的时效与渗碳导致大量碳化物的析出,其数量、大小与形态取决于服役温度和时间。

Aging and carburization during the service produced precipitation of carbides, the amount, size and forms of which depended on the service time and working temperature.

25. 利用纯镍标识钢的原始表面,研究了钢经td处理所产生的碳化钒覆层形成过程。

The original surface of a steel specimen was identified by pure nickel so as to study the formation process of a vanadium carbide coating on the surface of the steel specimen through TD treatment.

26. 介绍了碳化水箱损坏的原因及在设计、制造和使用过程中采取的防护措施。

The causes of failure and protection measures taken in the design, fabrication and operation of carbonation water tank were discussed.

27. 结果表明:珠光体温变形显著加快了碳化物球化过程。

Results showed that warm deformation of pearlite will accelerate greatly the spheroidizing process.

28. 因此,采取有效措施制备高活性度石灰和强化碳化反应过程具有十分重要的意义。

It"s very important to prepare lime with high activity and improve carbonization process by taking effective measures.

29. 研究了在镍钴合金镀液中加入碳化钨微粒形成镍-钴-碳化钨复合镀层的共沉积过程。Www.WeNtiyI.COm

Composite electrodeposits of nickel-cobalt-tungsten carbide were prepared by adding tungsten carbide particles in the nickel-cobalt alloy solution.

30. 研究了在镍钴合金镀液中加入碳化钨微粒形成镍-钴-碳化钨复合镀层的共沉积过程。

Composite electrodeposits of nickel-cobalt-tungsten carbide were prepared by adding tungsten carbide particles in the nickel-cobalt alloy solution.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!