中胶层用英语怎么说，中胶层的英文翻译

词语导航

基本信息

词语：中胶层

繁体：中膠層

拼音：zhōng jiāo céng

英语翻译

【医】 mesoglea

分词翻译

中的英语翻译：

be hit by; fit exactly; hit; suffer
【计】 medium
【化】 meso-
【医】 coup; stroke

胶层的英语翻译：

sub

翻译例句

1. 两层细胞（两胚层），中间是凝胶状的中胶层。

Two cell layers (diploblastic) separated by a gelatinous mesoglea.

2. 结构：由内胶层、内胶保护层、中胶层、钢丝缠绕层和外胶层组成。

CONSTRUCTION: It is composed of an inner rubber protection layer, middle rubber layer, steel wire spiral layer and external rubber cover.

3. 在加热过程中，胶层粘度随温度和时间的变化可用二重指数方程描述。

The viscosity change of a glue line with temperature and time could be described qualitatively by a dual equation.

4. 得到了散射电子在电子束胶层中背散射与前散射的能量沉积分布图。

The graphs of the forward scattering energy deposition and backscattering energy deposition have been given.

5. 在厚胶光刻工艺中重点解决了胶膜厚度的均匀性、胶膜与衬底的粘附性、大厚度差胶层的曝光、显影条件等的优化问题。

Uniformity of the photoresist film, adhesiveness between underlay and glue film, exposal and develop condition of high thickness difference are all solved in the thesis.

6. 介绍了复层建筑涂料的研制、生产、原材料特点以及胶粉不同掺量对复层涂料性能的影响；讨论了施工过程中的注意事项。

The development, production process, features of raw materials and the influence of the amount of powder adhesive on the performance of multi-layer coating system are introduced.

7. 研究了国产辛基酚醛增粘树脂在全钢载重子午线轮胎内衬层胶中的应用。

The application of a domestic octyl phenolic resin to the inner liner of all steel radial truck tire was investigated.

8. 研究环氧化反式1，4 聚异戊二烯（ETPI）在轮胎锦纶帘布层胶和钢丝带束层胶中的应用。

The application of epoxidized trans-1,4-polyisoprene(ETPI) in the nylon carcass ply compound and steel belt compound of radial tire was investigated.wwW.WEnTiYi.CoM

9. 通过评价实验，考察了压裂液冻胶在低渗透气藏微裂缝储层中的降滤失性能。

The fluid loss reducing capacity of the gel was investigated in the microcrack reservoirs of the low permeability gas reservoir through evaluation tests.

10. 基材与胶层结合力大，在存放或施工过程中不存在脱胶现象。

Bonding force of substrate and adhesive layer is large. No adhesive failure occurs during storage and construction.

11. 结论：生物蛋白胶能在空腔中形成一层薄膜，能够增加骨水泥遭受的阻力及降低其后续流动的范围。

Conclusion: Fibrin sealant could form a layer of film in the cavity. It could increase the force of resistance and decrease the range of subsequent of cement.

12. 分析了挖补修理中，补片的铺层阶差值、胶层的厚度及结构曲率的大小对胶接修理效果的影响。

The influences of the repairing parameters, including the ply drop off of patch, the adhesive thickness and the structural curvature, are also studied in detail for repair by replacing damaged parts.

13. 摘要：对不同后烘温度条件下，SU - 8胶在电铸液中的热溶胀性及胶层的内应力大小进行了研究。

Abstract: the influence of different post exposure bake (PEB) temperature on thermal swelling and the internal stresses of SU-8 photoresist were investigated.

14. 上述复合层可以防止包装瓶内的密封胶受到空气中水分和光线的污染，很好地保持了产品的性能和品质。

The composite layers can prevent sealant in the packaging bottle from pollution caused by water and light in the air, and keep the performance and the quality of products well.

15. 研究环氧化反式1,4聚异戊二烯(ETPI)在轮胎锦纶帘布层胶和钢丝带束层胶中的应用。

The application of epoxidized trans-1, 4-polyisoprene (ETPI) in the nylon carcass ply compound and steel belt compound of radial tire was investigated.

16. 研究芳纶/锦纶66复合帘线在高性能轿车子午线轮胎冠带层以及芳纶浆粕在载重子午线轮胎胎肩垫胶中的应用。

The application of complex aramid/nylon66 cord in cap ply of performance PCR tire and aramid pulp in shoulder pad of TBR tire were investigated.

17. 在对微纳米通道进行热键合过程中，分别改变键合胶层厚度，键合温度，通道尺寸和键合时间四个条件进行了实验。

In the process of thermal bonding, experiments are carried out under different conditions such as variable polymer thick, temperature, channel width and time.

18. 对转移后胶层与基材的附着力进行了试验。研究表明，湿法转移技术可以较好地解决压敏胶干式转移中存在的附着力差、转移困难及起泡等问题。

The result showed that wetting transfer technology can resolve the problems existed in the process of dry transfer:weak binding, frothing and difficulty of transfering.

19. 对转移后胶层与基材的附着力进行了试验。研究表明，湿法转移技术可以较好地解决压敏胶干式转移中存在的附着力差、转移困难及起泡等问题。

The result showed that wetting transfer technology can resolve the problems existed in the process of dry transfer:weak binding, frothing and difficulty of transfering.