词语导航
基本信息
词语：成品尺寸
繁体：成品尺寸
拼音：chéng pǐn chǐ cùn
英语翻译
【化】 final dimension
相关词条
1.finishedsize分词翻译
成品的英语翻译：
finished product; turnoff【化】 end item; final end-product; finished stock
【经】 completed product; finished stock; made-up articles
尺寸的英语翻译：
dimension; measure; measurement; size【化】 dimension
【医】 dimension
翻译例句
1. 胡德成品尺寸的显示在这上面的例证。
The finished dimensions of the Hood are shown in this illustration above.
2. 该模板上图中显示了座位成品尺寸的吊索。
The illustration above shows the finished dimensions of the seat sling.
3. 等温锻造的半成品已经接近成品尺寸，余量很小。
Isothermal forging of semi-finished products are close to finished size, very small margin.
4. 了解这种波动对成品尺寸精度的影响程度，对现场改进工艺很有参考价值。
It is a great help to improve rolling process that the influences of dimension variation on the product precision were comprehended.
5. 降低的成本也有助于那些能够生产不同形状和尺寸的成品铁制品的蒸汽动力轧钢厂的发展。
Reduced cost was also instrumental in developing steam-powered rolling mills capable of producing finished iron of various shapes and sizes.
6. 这家公司以其风格以及多功能的展示赢得了优秀设计奖，其引进了种类丰富的材料、成品、尺寸以及颜色。
The company won a Good Design Award for the stylish, versatile Play, which comes in a wide variety of materials, finishes, sizes and colours.
7. 试样的表面应光滑，无外来杂质及损伤。成品应经打磨后裁制成相应尺寸。
The surface should be smooth, no foreign impurities and injury. The finished products should be polished after the cut into the appropriate size.
8. 它们的各种尺寸是由被打磨加工的物件以及所需的成品类型来决定的。
They come in many wire sizes depending upon the work piece and the type of finish that you want.
9. 而且送来的成品木门还不能即时安装，每套门运到家中后都需要现场调整尺寸，有时一整天都不能完工。
And the finished product door still unable to install, every door to home after all, sometimes need adjust size can finish all day.
10. 最后成品的尺寸只有精细的颗粒般大小。
The final product has the advantage of a very fine grain size.
11. 而感到自豪和满意的成品棉被开头准确尺寸，设计和布局。
Take pride and satisfaction in a finished quilt that starts with accurate dimensions, design and layout.
12. 结果表明，随着铸坯加热温度的提高，冷轧无取向硅钢成品晶粒尺寸减少，有利织构组分增加。
The results show that the grain size of cold-rolled non-oriented silicon steel finished product decreases and benefiting texture component increases with increasing slab reheating temperature.
13. 设计的轮胎充气外缘尺寸和成品性能等达到国标要求。
The overall dimensions and performance of finished tire meet the requirements of the national standard.
14. 应用结果表明，这种多层推板电窑具有烧结后产品尺寸和性能一致性好、成品率高、运行成本低等特点。
The practical use of the kiln shows that the new kind of kiln features good uniformity of size and performance, high rate of qualified products and low operational cost, etc.
15. 检验成品灯上E14灯头尺寸S1的最大值和最小值。
To check the deminsion S1 minimum and S1 maximum of E14 caps on finished lamps.
16. 而且送来的成品木门还不能即时安装，每套门运到家中后都需要现场调整尺寸，有时一整天都不能完工，实在是太麻烦了。
And the finished product door still cannot deliver instant installation, every door after the house to adjust size, sometimes need not completed all day, is too much trouble.
17. 电容、半成品、短线连接产品是COMPEX公司的三大主打产品。这三大产品的设计完全符合客户需求尺寸和镀金选择，为客户提供收益最大化。
Capacitors, Sub mounts, Mounting shorts are COMPEX three main products. They are designed for the customers for optimum value, size and metallization choices.
18. 成品轮胎室内试验表明轮胎充气外缘尺寸符合设计要求，性能良好。
It is indicated by the indoor test of finished tire that the performance and overall dimensions of inflated test tire meet the design goals.
19. 在该T型栅工艺中栅长和栅帽的尺寸分别进行控制，实现了较好的工艺可控性和较高的工艺成品率。
The gate length and the dimension of the gate head can be controlled in the T-shaped gate processing, and good process controllability and high yield can be achieved.
20. 应用结果表明，这种多层推板电窑具有烧结后产品尺寸和性能一致性好、成品率高、运行成本低等特点。WWW.wenTIyi.com
The practical use of the kiln shows that the new kind of kiln features good uniformity of size and performance, high rate of qualified products an...
21. 但他表示，他为最后的玻璃纤维成品的尺寸感到吃惊。
But he said he had been surprised by the size of the final product, which is made of fiberglass.
22. 本机压砖过程施力平稳，压力大，自动化程度高，因此具有制品质量好，强度大，成品率高，外形尺寸标准等特点。
The machine pressed bricks dictate the process smooth and stress, high degree of automation, it has good quality products, high strength, high yield, the standard dimensions and so on.
23. 永磁铁气体各种开头标准尺寸是指烧结后，经磨削或绕结后直接为成品的符合客户要求的标准尺寸。
The standard sizes of all hard ferrite magnet shapes mean the Ones of finished products which undergo sintering and grinding processes.
24. 但往往由于实际加工的局限，成品天线的尺寸与设计值有一定的误差，了解加工误差值对分析天线性能有非常重要的现实意义。
However, the actual size of the antenna could not meet the designed size due to processing limitations, so analyzing the error is very important for the analysis of antenna"s performance.
25. 成品物品尺寸(含公差)在尺码固定释放后给出。
Final body dimensions (tolerance included) will be given after release of size set.
26. 成品物品尺寸(含公差)在尺码固定释放后给出。
Final body dimensions (tolerance included) will be given after release of size set.
版权声明：问题易所有作品（图文、音视频）均来源网络，版权归原创作者所有，与本站立场无关，如不慎侵犯了你的权益，请联系我们告知，我们将做删除处理！