
词语导航
基本信息
词语:单元孔
繁体:單元孔
拼音:dān yuán kǒng
英语翻译
【计】 cell orifice
分词翻译
单元的英语翻译:
cell; unit
【计】 cell; LOC; U
【化】 element
【医】 element
孔的英语翻译:
aperture; bore; foramen; hole; os; ostium; vulva
【化】 hole; opening
【医】 apertura; aperturae; aperture; bore; coel-; foramen; foramina; hiatus
mesh; opening; pore; Pori; porosity; porus; trema
翻译例句
1. 有些称为短期内孔系统的核磁共振单元,设计的磁铁并非完全环绕人身;
Some MRI units, called short-bore systems, are designed so that the magnet does not completely surround you;
2. 对于有限尺寸板内开孔的情形,文中用有限单元法来分析腰圆形孔口的应力分布和应力集中。
For the plates with finite dimensions, the finite element method is used to obtain the stress distribution and stress concentration around the ovaloid opening.
3. 如果肩膀等单元的环轴向定位不使用,住房孔,可以很容易制作,特别是经济。
If shoulders, snap rings etc. are not used for axial location, the housing bore can be produced easily and particularly economically.
4. 介质厚度的变化对Y孔中心频率、带宽的影响要比Y环单元FSS的大得多。
The center frequency and bandwidth of Y-aperture are much more influenced by the substrate thickness change than those of Y-loop element FSS.
5. 将车内灯和车库门遥控接收器控制单元的电线向上推,穿过前锁装配孔。
Push up the electric connecting lines for the interior light and the control unit for garage door opener through the assembly openings on the front lock.
6. 主要研究了无络筒单元捻接时的风道,即仅有常开孔打开的风道,以及出现概率较大的各个工作状态的风道。
Then, we simulate the advanced air passage when none of winding units is splicing, and the advanced air passage in the situations that are more likely to happen.
7. 采用实体单元模拟连接板件及螺钉,在连接板件钉孔部位建立接触状态,求解方法由ANSYS程序自动选择。
Members are modeled as solid elements, then plates and screws are glued. The equation resolution method is selected by ANSYS program automatically.
8. 另外,还采用接触单元对孔轴过盈配合联接组件进行了有限元分析,得到更为精确的强度分布。
Furthermore, the contact finite element was adopted to gain the accurate distribution of strength in the subassembly with the interference between the axle hole and the shaft.
9. 制孔方式方面采用以精密测速单元为核心的位移跟随技术,实现在线动态制孔。
As the drilling style, this system introduces fly drilling technology whose central device is exact speed measuring unit to achieve dynamic-drilling on-line.
10. 构造了一个满足孔边应力边界条件、层间应力连续条件以及层合板表面应力边界条件的孔边应力单元。
A new stress element near a hole which satisfies both the stress boundary conditions at the hole and at the surface of the laminate and stress continuity condition at the interface is developed.
11. 第二连接单元设置在沿吸入格栅侧面形成的弯曲部分的内表面上,并具有接纳铰轴的孔。
The second connecting unit is provided on the inner surface of a bent portion formed along the side of the intake grille and has a hole to receive the hinge shaft.
12. 整个消息之间的竞争以只解决第一比特之间的竞争来处理,使得消息如虫蛀孔般通过许多单元。
Contention between entire messages is addressed by resolving the contention between the first bit only so that messages wormhole through many cells.
13. 本文提供了一篇用有限单元混合法对开孔补强的圆柱壳进行应力分析的报告。
This paper presents a report of the stress analysis of a cylindrical shell, with a reinforced hole, by use of the mixed method in FEM.
14. 针对大港油田孔南地区孔一段冲积环境储层,开展了流动单元划分参数筛选和流动单元分类方法研究。
Parameter screening and classification method of flow unit were studied in alluvial environment in Kong 1 member in Kongnan area of Dagang oilfield.
15. 同时,旋转导向钻井工具接收由地面发出的指令,并通过稳定平台单元调控工作液来控制分配单元中的上盘阀高压孔的位置。WWw.wentIYI.com
The unit for controlling and assigning working liquid takes the filtered mud as the working liquid distributed in three mud pipes in turn.
16. 在一般LTCC模块内部,通孔做为一种电气连接单元,在信号频率足够高时其引入的电感会使模块性能恶化。
In a common LTCC filter, vias, an electric connecting, would act as a great inductance and worsen the performance of the model, when the operation frequency was high enough.
17. 一设置于转动单元凹 槽中的推动单元,该推动单元上具有一长孔;
A push unit which is provided with a long hole is positioned in the groove of the rotation unit.
18. 并在ANSYS中选择相适应的单元建立有限元计算模型,对含圆孔的复合材料板进行分析,得到了孔边应力场的数值解,给出孔边应力分布和板的变形。
Moreover, in ANSYS, built finite element model in which proper element types were selected, carried through analysis on composite material plate with round hole.
19. 结果表明:纯氢条件下气压越高,孔尺寸分布越趋于一致、孔位置和气孔结构单元分布越均匀;
The results show that at pure hydrogen atmosphere, the uniformity of pore size, spatial distribution of pores and pore-cells increases with hydrogen pressure.
20. 本发明是有关一种三孔式消能装置,包含上连接单元、下连接单元及至 少一消能钣;
The invention relates to a three-hole type energy dissipater which comprises an upper connecting unit, a lower connecting unit and at least an energy dissipation plate.
21. 以及一封盖于容置区的盖体,该盖体的一面具有一活动穿设于推动单元所设长孔中的心轴。
The push unit is further provided with a cover which is covering the capacity area. One side of the covering body is arranged with a movable mandrel which passes through the push unit"s long hole.
22. 氢气分压一定,选择合适的氩气分压可使熔体共晶凝固时,孔尺寸、孔位置和气孔结构单元的分布最均匀。
The results show that at pure hydrogen atmosphere, the uniformity of pore size, spatial distribution of pores and por…
23. 氢气分压一定,选择合适的氩气分压可使熔体共晶凝固时,孔尺寸、孔位置和气孔结构单元的分布最均匀。
The results show that at pure hydrogen atmosphere, the uniformity of pore size, spatial distribution of pores and por…
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
