封头用英语怎么说,封头的英文翻译


词语导航

基本信息

词语:封头

繁体:封頭

拼音:fēng tóu

英语翻译

【电】 capped end; end capped

相关词条

1.shellcover  2.endplate  3.rotaryheader  4.endsocket  

分词翻译

封的英语翻译:

envelop; seal
【经】 seals

头的英语翻译:

beginning or end; cobbra; conk; crumpet; end; first; garret; hair; head
leading; nob; noddle; pate; sconce; side; top; twopenny
【医】 capita; caput; cephal-; cephalo-; head; kephal-; kephalo-

翻译例句

1. 成型的封头通常应用单板制作。

A formed head shall generally be made of single plate.

2. 开孔,封头和壳体,计算。

Openings, head and shell, computation of.

3. 结果表明,冷旋近似椭圆封头是碟形封头。

The result shows that the former is the dished heads.

4. 建立了高压容器筒体与封头结构的有限元分析模型。

The finite element analysis model of cylinder and vessel head structures was established.

5. 本文介绍了平封头的圆柱形双层爆炸容器的设计特点。

The features of double walled cylindrical explosion containment vessels closed with flat heads are presented.

6. 推导出气瓶圆筒段、封头、接头和内衬的设计计算公式。

Calculating formulae for design of cylinder, dome, joint and liner of natural gas cylinder are derived.

7. 该焊机已成功地应用于锅炉封头相贯线接缝的自动焊接生产中。

The welding machine has been successfully applied to the automatic welding production of end for boiler.

8. 本文对冷旋压近似椭圆形封头代替标准椭圆形封头进行了分析。

In this paper an analysis of substitution of cold spinning approximate ellipsoidal heads for Standard ellipsoidal head is presented.

9. 该项技术的成熟应用对今后压制更大的厚壁封头创造了有利条件。

Favourable conditions have been set up for even thicker wall head with this ripe technology.

10. 使用这种方法,一般只需两到四次透照就能完成封头焊缝的探伤。

It takes only two to four irradiations to inspect a sealing head weld by using the technology.

11. 得到了不同封头结构的物流分配不均匀特性与雷诺数之间的关系式。

The correlations of the flow maldistribution characteristic with Reynolds number are obtained under different header configurations.

12. 在不增加气瓶总质量的情况下,得到了提高封头疲劳强度的设计方法。

Design method to enhance fatigue strength of a dome is given without increase of total cylinder mass.

13. 对于壳体上的特殊变径段折边封头,应视工厂加工能力采用相应方案。

For the special flanged head at reducer section on shells, the plan shall depend on the fabrication capacity of plants.

14. 介绍一种成功修复封头压模的工艺方法,并总结了失败经验,以供参考。

A technological method to repair the die of vessel head successfully is introduced, and the failing experience is concluded for reference.

15. 介绍椭球封头在数控加工试验过程中出现的一些问题及相应的解决方案。

This report introduces the problems and settling in the experiment report of the numerical control fabricate of ellipse head.WWw.weNtiYI.CoM

16. 本文就无折边球形封头的适用范围、工作环境及结构设计进行分析讨论。

The application scope, working condition and structural design of the sectional spherical head were analyzed and discussed in this article.

17. 对于所有给定壳长、壳厚、半径及封头厚的组合结构,均找到了完全解。

The exact solutions have been found for all configurations with different parameters of shell length, shell thickness, radius and plate thickness.

18. 使用者仅需输入设计条件,然后在结果处轻轻一点,即可计算出封头厚度。

The calculating results of thickness of elliptical heads can be automatically obtained only by inputting design conditions.

19. 本文介绍了自行设计的封头自动磨光机的工作过程、结构特点及应用效果。

This article introduced the working process, structure characteristics and application of the head automatic finishing machine designed by myself.

20. 通过对酯化反应釜底封头腐蚀问题的分析,提出改进搅拌方式的解决方案。

The program of improving the mixing form was proposed through the corrosion analysis of the head at the bottom of esterification reactors.

21. 介绍了以封头对称轴为中心沿径向设置立筋制作瓜瓣封头压制模具的过程。

The method of establishing radial support steel bars based on the symmetry axis of heads to manufacture the melon petal dies was presented.

22. 用TVD格式数值模拟了带平板封头爆炸容器的内部爆炸载荷的分布规律。

Numerical simulation was conducted to study the internal blast loading of explosion chamber with flat end using TVD schemes.

23. 封头兄弟是连体双胞胎汤姆和巴里豪的故事-一个怪物变成原始朋克的感觉。

Brothers of the Head is the story of conjoined twins Tom and Barry Howe - a freak show turned proto-punk sensation.

24. 主泵接于每个蒸汽发生器封头出口的位置也有安全和性能优势,西屋电气称。

The location of the pumps in the channel head of each steam generator also has safety and performance advantages, Westinghouse says.

25. 运用Excel97中的函数功能,编写出压力容器椭圆形封头厚度的计算程序。

The procedure for calculating thickness of elliptic heads of pressure vessel was compiled by applying function in EXCEL97.

26. 该工艺主要材料包括对拉螺栓、PVC套管、塑料封头、竖骨架、铝合金骨架等。

The main materials of this technology are split bolt, PVC casing, plastic head, vertical skeleton and aluminum alloy skeleton.

27. 对焦炭塔上部壳体和球形封头的减薄原因进行了简要分析,提出了临时修复措施。

The reason of thinning out of the upper shell and spherical head for coke tower was analyzed briefly. The temporary repair measure was proposed.

28. 对焦炭塔上部壳体和球形封头的减薄原因进行了简要分析,提出了临时修复措施。

The reason of thinning out of the upper shell and spherical head for coke tower was analyzed briefly. The temporary repair measure was proposed.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!