夹杂物用英语怎么说,夹杂物的英文翻译


词语导航

基本信息

词语:夹杂物

繁体:夾雜物

拼音:jiā zá wù

英语翻译

【化】 foreign impurity; foreign inclusion; foreign material; foreign matter
foreign substance; inclusion

相关词条

1.enclosure  2.occlusion  3.impurity  4.foreignmaterial  5.slaginclusion  6.drossinclusion  7.inclusion  8.occludedforeignsubstance  

分词翻译

夹的英语翻译:

clip; nip
【医】 clamp; splint

杂物的英语翻译:

cats and dogs; sundries
【经】 sundries

翻译例句

1. 吹入氩气能增加夹杂物的去除率。

Argon bubbling increases the inclusion removal rate.

2. 钢中夹杂物对冲击韧性不利。Www.wENTiYI.COM

Inclusion is harmful to impact toughness.

3. 钢中夹杂物对材料声发射现象有较大的影响。

The inclusion in steel deeply affected the acoustic emission of material.

4. 在夹杂物内部还发现了垂直于纤维轴的裂纹。

Fissures which are perpendicular to the fiber axis have been found inside the inclusion.

5. 在ASP典型夹杂物的语句之前或之后执行?

In ASP CLASSSIC inclusions are executed before or after the statements?

6. 探讨了降低钢中总氧含量及夹杂物含量的措施。

Measures to reduce content of oxygen and inclusion in steel are discussed.

7. 随着焊接热输入的增加,夹杂物平均尺寸增大。

The average size of inclusions is increased with the increasing of heat input.

8. 提出生产高碳钢线材过程中减少夹杂物的关键措施。

Key measures to decrease inclusion are put forward during producing high carbon steel.

9. 提出生产高碳钢线材过程中减少夹杂物的关键措施。

Key measures to decrease inclusion are put forward as producing high carbon wire rod.

10. 提出夹杂物异常光谱信号是由于夹杂物局部富集产生。

So local enrichment of inclusion results in exceptional spectrum signal of inclusion.

11. 提出了有效控制夹杂物形态、降低偏析程度的技术措施。

Measures controlling the morphology of inclusions and reducing the degree of segregation was proposed.

12. 夹杂物。金属凝固过程中残留在其内部的杂质或非金属颗粒。

Inclusion. Foreign material or non-metallic particles entrapped within the metal during solidification.

13. 介绍了铝熔体中夹杂物与气体的主要存在形态及其相互作用。

The main existing form and its interaction of inclusion and gas in aluminum melt are introduced.

14. 计算结果表明:钢液的夹带作用是影响夹杂物分布的关键因素。

Numerical results show that fluid flow is the key factor to affect inclusion"s distribution.

15. 数值结果还表明钢液的对流输运是影响夹杂物分布的重要因素。

Numerical results also showed that convective transfer of molten steel is the key factor to influence the inclusion distribution.

16. 辙叉内部的铸造缺陷主要是沿晶界析出的非金属夹杂物和缩松。

The casting defects in the railway frog were mainly the nonmetal inclusions and the shrinkage.

17. 为了更好地控制焊缝质量,提出了焊缝夹杂物裂纹指数的概念。

It puts forward a conception of weld inclusions crack index so as to better control quality of weld seam.

18. 这一方法有望进一步被开发应用于更小的非金属夹杂物的快速分析。

It is expected that the method can be further developed for rapid analysis of smaller non-metallic inclusions.

19. 最等级含有高达25 %非凹凸棒材料的形式,碳酸盐和其他夹杂物。

Most grades contain up to 25% non-attapulgite material in the form of carbonates and other inclusions.

20. 与此同时,阐述了夹杂物研究在工艺方面和理论方面所取得的最新进展。

At the same time, new development of technology and theory of inclusions has been elaborated.

21. 讨论了冷轧工作辊接触疲劳裂纹、剥落、夹杂物裂纹和磨损等失效形式。

The failure forms of cold work roll including contact fatigue crack, spalling, inclusion crack and wear are discussed.

22. 当夹杂物细小时,上述操作要点尤其重要。用金刚石磨料抛光是适宜的。

When the inclusions are small, the above-mentioned operation is of particular importance. Diamond abrasive polishing shall be applicable.

23. 对有裂纹的连铸板坯进行了高温塑性试验、低倍、金相组织和夹杂物分析。

The slabs with these cracks were analyzed by means of high temperature plasticity, macrostructure, microstructure and inclusion test.

24. 针对超声波作用下金属液中微小非金属夹杂物的凝聚过程进行了分析研究。

The coagulation behavior of micro sized non metallic inclusions in molten metal processed by ultrasound was analyzed and discussed.

25. 相对于试样心部的夹杂物,表层夹杂物对实验钢的疲劳性能的危害性更大。

Non-metallic inclusions on the subsurface of specimen do great harm to its fatigue property than that in the centre of specimen.

26. 采用数值模拟方法分析了不同工艺因素对RH精炼中夹杂物去除过程的影响。

The numerical method was employed to study the effect of technological factors on the inclusion removal in RH degasser.

27. 采用数值模拟方法分析了不同工艺因素对RH精炼中夹杂物去除过程的影响。

The numerical method was employed to study the effect of technological factors on the inclusion removal in RH degasser.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!