
词语导航
基本信息
词语:信号缓冲
繁体:信號緩沖
拼音:xìn hào huǎn chōng
英语翻译
【计】 signal damping
分词翻译
信号的英语翻译:
semaphore; signal
【计】 semaphore; signal
【化】 sign; signal
【医】 signal
【经】 call letter; signal
缓冲的英语翻译:
amortize; buffer; cushion
【计】 buffering
【化】 buffer
【医】 buffer; buffering
【经】 buffer
翻译例句
1. whitespace是行业术语,指的是毗连电视频段的未使用的波段,它还可以为收到的杂散信号和其他干扰提供缓冲。
White space is industry lingo for the unused airwaves that abut TV spectrum and provide a buffer from stray signals and other interference.
2. 对于垂直方向上的每个空格来说,管理程序都会采用 DMA 方式将自己的缓冲区读到GPU 的内存中,然后将 GPU的可视页刷新为与垂直空格信号同步的数据。
Every vertical blank, the hypervisor DMAs this buffer to the GPU memory, and then flips the GPU"s visible page to the new data synchronously with the vertical blank signal.
3. 另外一个重要的特征就是还有一个缓冲可通连接,因此你还可以从相同的输入声道道把信号(不需音量控制)传递到卫星放大器。
Another important feature is a buffered pass-through connection so that you can also pass signal along (without volume control) to a satellite amplifier from the same input channels.
4. 一旦接收到了转储数据的信号,将使用 is_dumping全局变量禁止其他的线程更改该缓冲区的内容。
The is_dumping global variable is used to stop other threads from changing the contents of the buffer once a signal has been received to dump data.
5. 请参见:《能减缓iPhone4的信号丢失问题的苹果缓冲器附件》——编者。
See: Apple"s Bumper case alleviates the iPhone 4 signal-loss problem. -ed.
6. 如果你用长电缆,或驱动(例如并行DAC)几个数模转换器,对于缓冲区中的数据信号它是很好的做法。
If you are driving long cables, or are driving several DACs (parallel DAC for example), it is good practice to buffer the data signal.
7. 本文介绍一种在强噪声下弱信号检测中的高速数据采集缓冲系统。
A high speed data collector and buffer, applied to detect weak signal in strong noise, is described in the paper.
8. 通过拉动输出,输入缓冲电路享有改进的余地,能够可靠信号,低功耗条件,即便当两个输入都很低。
By pulling up the output, the input buffer circuit enjoys improved margin, and is able to reliably signal a low power condition even when both inputs are low.
9. 最后就如何编写通用的缓冲区溢出代码进行了分析和举例,还介绍了一种新的攻击手段,基于信号量的攻击。
Last, i give some examples on how to write exploit programs after finding vulnerabilities. i also introduce a new exploit method : exploit based on software signal.
10. 当DRNN预测下一时刻缓冲区中的信元数超过阈值时,控制器产生一个反馈控制信号减小信源进入网络的信元速率以避免拥塞发生。
When DRNN predicts that the number of cells in buffer exceeds the threshold limit in the next time cycle, a control signal is generated by the controller to throttle arrival cell rate.
11. 但是,根据数字信号应用的特点,可以采用循环缓冲来减小指令存储器的功耗。
According to the characteristics of digital processing applications, loop buffering can be used to reduce the power consumption of instruction memories while fetching instructions.
12. 该电路应用两级差动放大增加电路增益,利用源极跟随器作为电压缓冲器以减少信号电平损失。
It uses tow-stage differential amplifiuers to increasee the circuit gain and uses a source follower as a voltage buffer to decrease signal volt- age losing.
13. 处于等待状态的一个进程,该进程在一个环形缓冲区或信号灯处等待,直到另一个进程发出释放。
A process in the wait state. A process waits on a ring buffer or semaphore, unable to change state and resume execution until the ring buffer or.
14. 不平衡信号的测量“消极或差分输出”第二缓冲区。
Imbalance signal is measured at the "negative or differential output" of the second buffer.
15. 视频信号采集模块中,采用ADV7183芯片实现了视频数据的采集输入,设计乒乓缓冲区数据组织结构实现了视频数据的输入和访问,提高了数据访问效率。
In the video CODEC module, the design based on ADV7183 was proposed. To improve the data access efficiency, a data structure called ping-pong buffer was presented for the input video data.
16. 所述缓冲级(350)可对来自所述滤波级(340)的经滤波信号进行缓冲。
The buffer stage (350) may buffer a filtered signal from the filter stage (340).
17. 所述第二缓冲级(370)可对来自所述第二滤波级的第二经滤波信号进行缓冲。
The second buffer stage (370) may buffer a second filtered signal from the second filter stage.
18. 所披露者外,是改善差动输入缓冲器模范体现低功耗接收信号和相关的方法。
Disclosed herein are exemplary embodiments of an improved differential input buffer for receiving low power signals and associated methods.
19. 对于便携式电子产品来说,运算放大器可算是万能的信号调节电路,因为它可以执行滤波器、放大器、电压感测器、电平移位器、缓冲器、甚至开关等多种不同功能。
Operational amplifier is the most versatile signal conditioning block in any portable system. It can be a filter, an amplifier, an voltage detector, a level shifter, a buffer or even a switch.wWw.weNtIyI.cOm
20. 每一级正相和负 相信号输出端分别与各输出缓冲电路的正相和负相输入端相连。
The input ends of positive phase and negative phase of the first time-delay unit are respectively connected with the output ends of positive phase and negative phase of the last time-delay unit.
21. 每一级正相和负 相信号输出端分别与各输出缓冲电路的正相和负相输入端相连。
The input ends of positive phase and negative phase of the first time-delay unit are respectively connected with the output ends of positive phase and negative phase of the last time-delay unit.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
