词语导航
基本信息
词语：钢丸
繁体：鋼丸
拼音：gāng wán
英语翻译
【化】 steel shot
分词翻译
钢的英语翻译：
steel
【化】 steel
【医】 steel
丸的英语翻译：
bolus; pellet; pill
翻译例句
1. 主要生产不锈钢丝、不锈钢丸。
Main production stainless steel wire, stainless steel capsules.
2. 可以喷玻璃砂，不可喷钢丸。
Glass bead blasting is acceptable. Steel shot blasting is not acceptable.
3. 产品作用：不锈钢丸广泛应用于抛光、喷砂。
Product function: stainless steel balls are widely used in polishing, sand blasting.
4. 炉矿渣，陶粒，碎砖和钢丸也可在适当的地方使用。
Blastfurnace slag, expanded clay, broken brick and steel shot may be used where appropriate.
5. 主要生产抛喷丸用铸铁丸、碳丸、钢丸、丝切丸、锈钢弹丸。
Main products include cast iron shots. cast steel shots, steel wire cut shots and stainless steel shots etc.
6. 用于喷抛清理一种流动材料，例如砂子、钢丸、玻璃珠或塑胶制品。
A course material used in blast cleaning, such as sand, steel shot, glass beads or plastics.
7. 运用商用软件ABAQUS建立了铸钢钢丸冲击结构钢靶材的三维有限元模型。
In the present study, a three-dimensional FE model of shot peening process was developed using commercial software ABAQUS.
8. 最值得一提的是：在国内，人人都相信进口货，而“恒博不锈钢丸”却远销国外！
It is worth mentioning that most are: at home, everybody is convinced that the imported goods, and "Hang bo stainless steel pill" is sold abroad!
9. 相应金属磨料生产新工艺、设备及原材料的开发与研究，并出口越南钢丸钢砂全套生产线。
Research and development new techniques, new equipments and raw material. We have exported to Vietnam a full set of production line of steel shot and steel grit.
10. 本实用新型利于维修保养、经久耐用、成本低，对于大量的粉尘和钢丸能够有效地进行分离。
The utility model is favorable for maintenance and repair, durable in use and low in cost and can effectively separate a mass of powder-dust and steel shot.
11. 分段完工报验前舱室、管子内的钢丸及垃圾清洁结束；分段报验认可后脚手架拆完须跟踪清洁；
The steel grit and rubbish should be cleaned inside tanks and pipe before final inspection. After inspection was accepted, one more cleaning after all scaffolds was removed.
12. 本文基于国内某航空企业的需要，对300M钢零件喷丸强化后打磨处理对其强化效果的影响及其影响机理进行了研究。
Based on the requirement of a domestic aviation enterprise, the influence of polishing after shot peening on 300m steel and its mechanism are studied in this paper.
13. 本文对比分析了氮基保护气氛和真空两种热处理加热介质对300M钢疲劳性能的影响，并研究了热处理后表面喷丸强化对300 M钢疲劳性能的改善情况。
In this paper, the effect of heat treatment by the nitrogen atmosphere and vacuum furnace and shot peening thereafter on fatigue properties of 300m steel were studied.
14. 本文介绍喷丸强化对不锈钢压缩弹簧疲劳强度的影响。
This paper describes the effect of shot-peening on fatigue strength of compressive coll springs of stainless steel.
15. 本文对采用喷丸处理改善结构钢的短裂纹断裂性能进行了探讨。
In this paper, an attempt has been made to improve the short-crack fracture characteristics of structural steel by the application of shot peening.
16. 对焊接的SUS304不锈钢进行氧化、打磨、酸洗和喷丸等不同处理，研究了不同表面处理对SUS304不锈钢耐微生物腐蚀性能的影响。
The influence of surface treatment such as oxidizing, grinding, pickling and blasting on the resistance to microbiologically influenced corrosion (MIC) of stainless steel SUS304 is studied.
17. 本文对采用喷丸处理改善结构钢的短裂纹断裂性能进行了探讨。
This method is also proved to be reasonable based on experimental data of fatigue short crack at notch.wwW.weNTIYi.CoM
18. 外观光亮、无锈，圆珠状(切丸，圆柱状)，广泛应用于铜、铝、锌、不锈钢等工件的表面处理。
Looks bright, no rust, bead-like (cut pill, cylindrical-shaped), widely used in copper, aluminum, zinc, stainless steel workpiece surface treatment.
19. 外观光亮、无锈，圆珠状(切丸，圆柱状)，广泛应用于铜、铝、锌、不锈钢等工件的表面处理。
Looks bright, no rust, bead-like (cut pill, cylindrical-shaped), widely used in copper, aluminum, zinc, stainless steel workpiece surface treatment.
版权声明：问题易所有作品（图文、音视频）均来源网络，版权归原创作者所有，与本站立场无关，如不慎侵犯了你的权益，请联系我们告知，我们将做删除处理！