词语导航
基本信息
词语：地址端口
繁体：地址端口
拼音：dì zhǐ duān kǒu
英语翻译
【计】 address port
分词翻译
地址的英语翻译：
【计】 A; AD; ADDR; address; ADR; ADRS
端口的英语翻译：
【计】 COM port; port
翻译例句
1. 作为一个整体单位进行寻址和控制，应给每个信息段分配一个供外部控制的地址，而不是对每个字节进行寻址，否则至少需要19 个地址端口。
Unit as a whole, addressing and control information to each paragraph should be assigned an address for the external control rather than for each byte addressing, or at least address port 19.
2. 正如你所见，NAT路由器将每台计算机的IP地址和端口号都存储在地址转换表中。
As you can see, the NAT router stores the IP address and port number of each computer in the address translation table.
3. 因为每个通信都包含源ip地址和源端口，所以主机能够区分这三个不同的连接。
Because every communication contains the source IP address and source port, the mainframe can distinguish between those three different connections.
4. 它的使用方法是把服务请求转到启动该工具所在的地址和端口，然后把请求从那里转发至实际的端点。
You use it by directing your service requests to the address and port under which the tool was started, and then forward the requests to the actual endpoint from there.
5. 一条通道由一个主机地址和一个端口组成。
A channel consists of a host address and a port.
6. 为正确地连接，并将其发送到第二个UAS，我们需要地址和端口。
To connect correctly and send this to the second UAS, we will need the address and port.
7. 在这里，我们通过为该绑定指定端口地址来为服务定义通信端点。
This is where we define a communication endpoint for the service by specifying a port address for the binding.
8. 使用相应的凭证将请求发送给前面已配置的IP地址和端口。
Send the request to the IP address and port configured above with the appropriate credentials.
9. 指定应用程序服务的远程服务器IP地址、端口和URI。
Specify the Remote server IP address, port and URI of the application service.
10. 如果客户机发布了一个支持单向操作的通知侦听器服务，它的WSDL将包含该服务的端口地址。
If the client has a published a notification listener service supporting a one-way operation, its WSDL will contain the port address for the service.
11. 每个应用程序容器的引导程序端口地址是每个集群成员框右下角的数字。
The bootstrap port address for each application container is the number at the lower right-hand corner of each cluster member box.
12. 具体来说，需要指定运行攻击所针对的目标IP地址和端口。
Specifically, you must specify the destination IP address and port against which to run the exploit.
13. 当信息包到达时，根据每个信息包中包含的类型、源地址、目的地址和端口信息来过滤它们。
As packets arrive, they are filtered by their type, source address, destination address, and port information contained in each packet.
14. 因此，该方法需要编校服务器的IP地址和端口号。
Therefore the method requires the IP address and port number of the redaction server.
15. 例如，代码中的端口号必须匹配流程服务器中按引导地址指定的端口2809。
For example, the port number in the code must match the port 2809 specified as the bootstrap address in the process server.
16. 主机地址和端口号将让我们接触到与期望的对象通信的OR B。
The host address and port number will get us to the ORB that will communicate with the object we desire.
17. 可以指定这个FTP服务器需要关联的IP地址和端口。
You can assign specific IP address and ports for which this FTP server needs to be associated.
18. 通常，应用程序调用这个例程来了解特定RPC服务所用的协议、IP地址和端口号。
Normally, applications call this routine to know the protocol, IP address and port number being used to cater for a particular RPC service.
19. 另外，每个端口的地址均未定义。
Also notice that the address for each of the ports is not defined.www.wENTIYI.coM
20. 下面示例中，DB 2数据服务器节点的IP地址是9.126.84.161，端口为50000。
For the example below, the IP address of the DB2 data server node is 9.126.84.161 and the port 50000 is used.
21. 注意该URL中如何表示HSB配置中两个服务器的IP地址和端口号。
Notice how the IP addresses and port Numbers of both of the servers in the HSB configuration are present in the URL.
22. 使用nslookup之类的程序将HOST brutus解析为一个IP地址，然后将这个IP地址和端口输入到适当的字段中。
Use a program like nslookup to resolve the HOST brutus to an IP address, and then enter this and the port into the appropriate fields.
23. 为指定IP地址和端口上的任何URI接受所有进入请求。
Which accepts all incoming requests for any URI on the specified IP address and port.
24. 在FirewallType中保留原来的值，这意味着入站信息将被传递到静态定义的后端服务器地址和端口。
Leave the Firewall Type as is, which means the inbound traffic will be passed to the statically defined back end server address and port.
25. 客户机存根对象将通过使用AskServiceLocator对象在try语句中创建，后者为在WSDL中定义的服务定义了服务地址和端口。
The client stub object is created in the try statement using the AskServiceLocator object that defines the service address and port for the service as defined in the WSDL.
26. 服务器可以向特定地址和端口发送数据报，供客户端接收，如清单5所示。
The server can then send a datagram to the address and port for the client to receive, as shown in Listing 5.
27. 在初始网页上，输入两个UAS应用程序的地址和端口，然后按createcall。
On the initial Web page, enter the addresses and ports of the two UAS applications and then press create call.
28. 在初始网页上，输入两个UAS应用程序的地址和端口，然后按createcall。
On the initial Web page, enter the addresses and ports of the two UAS applications and then press create call.
版权声明：问题易所有作品（图文、音视频）均来源网络，版权归原创作者所有，与本站立场无关，如不慎侵犯了你的权益，请联系我们告知，我们将做删除处理！