高温材料用英语怎么说,高温材料的英文翻译


词语导航

基本信息

词语:高温材料

繁体:高溫材料

拼音:gāo wēn cái liào

英语翻译

【化】 high-temperature material

分词翻译

高温的英语翻译:

high temperature
【医】 hyperthermia; hyperthermy

材料的英语翻译:

data; datum; makings; material; stuff
【医】 data; datum; material; stock
【经】 material; materials; spoilage

翻译例句

1. 钴基合金是一种重要的高温材料。

Cobalt - based alloy is a kind of important materials used in elevated temperature.

2. 重点叙述了两种高温材料的国内外研究现状;

Research state of these two high temperature materials at home and abroad was summarized with focus.

3. 夹克高温材料,保证机械稳定性和非常密切的宽容。

Jacket with a high temperature material which assures mechanical stability and very close tolerance.

4. 这些面砖敷贴在用耐高温材料制成的机头和机翼前缘。

The tiles are backed by a high-temperature-resistant material on the nose and leading edges of the wings.

5. 本文首次综述了这类含环三磷腈环的耐高温材料的研究进展。

This article introduces the progress of these fire-and heat-resistant materials which contain cyclotriphosphazene for the first time.

6. 系列和M系列产品线中的加热器使用高温材料作为加热器表面。

Heaters in the G-Series and M-Series product lines use a high-temperature material for their surface face.

7. 分析了激光云纹干涉法测量高温材料热膨胀系数的原理和可行性。

The theory and feasibility is analyzed, for measuring Linear Expansion Coefficient of high temperature material by moiré interferometry.

8. 编制了有限元程序CCGC - 1以模拟计算高温材料蠕变裂纹的扩展。

A finite element program CCGC-1 is compiled to simulate the creep crack growth rate in materials working at elevated temperature.

9. 铌及铌硅化合物具有优良的力学性能,可替代现有的镍基合金超高温材料。

Niobium and niobium silicides due to their good mechanical properties, have high potential for being the high-temperature materials as a substitute for nickel alloys.

10. 结果发现,粉冶材料的焊缝不仅具有作为高温材料的很大可能性,而且有潜力用作结构零件。wWW.WeNTiyI.cOM

As a result, it was found that the welds of the powder metallurgy materials have good potential not only for highperformance materials but also for structural Conponents.

11. 高温材料,相控阵传感器,低电流的要求较稳定的输入电压,环境温度,或输出频率范围的输出信号。

The high temperature materials, phased array sensor, and low current requirements stabilize the output signals over a wide range of input voltage, ambient temperature, or output frequencies.

12. 自蔓延高温合成广泛用于制备难熔高温材料及其他先进材料,本文简要介绍了自蔓延高温合成的理论基础及技术应用。

The technique of SHS is widely used to product refractory materials and other advanced materials. Theoretical fundamentals and the SHS processing are described in the paper.

13. 所使用的材料必须能够耐高温。

The materials used have to be able to withstand high temperatures.

14. 这种“可感应环境”的材料可根据外界环境温度和体温进行自我调节,帮助士兵免受高温严寒的困扰。

This "environmentally responsive" material would keep a soldier not too hot and not too cold, constantly adjusting to outside conditions as well as body heat.

15. 为了抵御高温和辐射,探测器里的仪器将处于一个巨大的由碳复合材料制成的隔热罩的保护之下,但这个隔热罩目前还没完成。

To withstand the temperatures and the radiation, the instruments will be protected by a huge carbon-composite heat shield that still needs to be built.

16. 这将有助于研究人员挑选出最适合热核反应堆的建筑材料,因为热核反应堆与高温等离子体会发生接触。

It will help to choose optimal construction materials for elements of the thermonuclear reactor that contacts with hot plasma.

17. NASA已经宣布将在这个“超级火热”的航空器中进行5项科学实验。航空器将得到表面的碳纤维材料层的保护,这个保护层能够忍受华氏2500度的高温。

NASA just announced five science experiments that will fly on the scorching probe, which will be protected by a carbon-fiber heat shield that can withstand temperatures of 2, 500 degrees f.

18. NASA已经宣布将在这个"超级火热"的航空器中进行5项科学实验。 航空器将得到表面的碳纤维材料层的保护,这个保护层能够忍受华氏2500度的高温。

NASA just announced five science experiments that will fly on the scorching probe, which will be protected by a carbon-fiber heat shield that can withstand temperatures of 2,500 degrees F.

19. 卡夫非常希望能找到一种神奇的薄膜材料,成本比一般包装材料稍高,但又能降低巧克力在高温下产生的自然变化。

Essentially, Kraft wants a thin-film wonder-material that doesn"t cost much more than conventional packaging but that minimizes the onset of natural processes even at really high temperatures.

20. 材料的合成过程是这样:首先,他使高温碳氢混合气体和铁催化剂相互作用产生密集的碳纳米管群,然后再用聚合物充填碳纳米管间的空隙。

He created this composite by growing a forest of nanotubes using hot hydrocarbon gases and an iron catalyst, and then filling the space between the tubes with the polymer.

21. 当热室经太阳能加热,达到2 700度的高温时,铁氧化合材料部件中部分氧原子发生逃逸。

Solar energy heats the hot chamber to a scorching 2,700 degrees, hot enough to force the iron oxide composite to lose oxygen atoms.

22. 这将背离目前的高性能材料制造方式,目前的方式中,强化学键、昂贵的组成成分以及高耗能加工过程(在高温条件下)都是获得高性能材料所必需的。

This would be a departure from the current approach, where strong bonds, expensive constituents, and energy intensive processing (at high temperatures) are used to obtain high-performance materials.

23. 流量控制器:对于高温,对腐蚀性介质,在特殊材料和特殊设计。

Flow controllers: for high temperatures, for aggressive media, in special materials and special designs.

24. 什么材料能耐这样的高温。

What material can resist such a high temperature?

25. 在德国的一个实验室里,科学家们在1200摄氏度的高温下得到了一种高密度的铝材料。

A lab in Germany, subjected extremely fine-grained aluminum to a scorching 1,200 degrees Centigrade.

26. 齿轮材料选用高级低碳合金钢,使用自动化高温渗碳淬火处理。

Top low carbon alloy steel as gear material, adapting automatic carburizing and quenching heat treatment.

27. 在较高温度时,这种材料全部是奥氏体,但随着冷却就进入到铁素体和奥氏体稳定状态的区域。

At high temperatures, the material is entirely austenite, but upon cooling enters a region where the stable phases are ferrite and austenite.

28. 制造这种装置需要能耐高温、高压的材料。

Manufacture of this device requires such materials as can bear high temperature and pressure.

29. 制造这种装置需要能耐高温、高压的材料。

Manufacture of this device requires such materials as can bear high temperature and pressure.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!