消除电路用英语怎么说,消除电路的英文翻译


词语导航

基本信息

词语:消除电路

繁体:消除電路

拼音:xiāo chú diàn lù

英语翻译

【电】 cancellation circuit

相关词条

1.wipecircuit  2.cancelcircuit  

分词翻译

消的英语翻译:

disappear; eliminate; pass the time in a leisurely way; remove; vanish
【医】 slake

除的英语翻译:

divide; except; get rid of; remove
【计】 divide
【医】 de-; des-; Div.; divi-divi; e-; ex-

电路的英语翻译:

circuit; circuitry
【计】 electrocircuit
【化】 circuit; electric circuit
【医】 circuit

翻译例句

1. 它们还具有误差消除电路中使用高转换速率和带宽。

They also feature higher slew rate and bandwidth for use in error cancellation circuits.

2. 直流侧纹波消除电路是基于直流线路中纹波的直接再注入原理而设计。

The circuits of dc-side ripple reduction are based on direct reinjection of the ripple in series with the dc line.

3. 它建议人们获得电工做安装,或自己做,如果他们很舒服消除电路盒盖,该公司说。

It"s recommended that people get an electrician to do the installation, or do it themselves if they are comfortable removing a circuit box cover, the company says.

4. 运放参数主测试电路采用辅助放大器测试法设计,通过相位补偿网络消除电路自激现象。

The main test circuit adopts the auxiliary amplifier method with phase compensation circuits in order to avoid self-excitation.

5. 本文提出的新型大功率混合直流接触器由闭合弹跳电弧消除电路、分断电弧消除电路和接触器本身组成。

In this paper, a new high power hybrid DC contactor is researched to slake the effect of arc for the application in the railway.

6. 针对变频器输出频率显示信号中的高频噪声,设计了相应的噪声消除电路,给出了进一步提高系统抗干扰能力的措施。

According to the high frequency noise of inverter output frequency display signal, the noise absorbing circuit is designed, the measures of reducing noise are presented.

7. 这种电路具有等电位隔离特性,能消除电网络中其它电阻对被测电阻的影响,可实现网络电阻的直接测量。

The effect of the other resistors in an electric network on the measured resistors can be removed and it is possible to measure network resistors directly by this circuit.

8. 脉搏信号微弱、敏感、易受干扰,因此为了消除脉搏测试中的各种噪声,设计了隔离电路和多重滤波电路。

Weak pulse signal, sensitive, vulnerable to interference, in order to eliminate the noise pulse test, the isolation circuits and multiple filter circuit design.

9. 采样保持电路设计采用了电容下极板采样技术,不仅有效地避免了电荷注入效应引起的采样信号失真,而且消除了时钟馈通效应的不良影响。

The sample and hold circuit is employed by the bottom plate sampling technique, which could not only cancel the charge injection error but also eliminate the effect of clock feed-through.

10. 方法①提高整体电路共模输入阻抗以消除皮肤接触阻抗匹配失衡;

Methods High common mode input impedance of the circuit is used to remove the interference due to imbalance electrode impedance.Www.weNtiyI.coM

11. 前者可延长曝光时间来消除,后者可通过高填充因子和放大滤波电路予以有效抑制。

The former can be eliminated by prolonging exposure time and the latter can be inhibited effectively by selecting higher fill factor and adopting amplifying and filtering circuits.

12. 设计了一种能够消除其他雷达信号干扰的参差电路,阐述了参差电路的应用原理、工作原理,介绍了实际电路的工作过程和特点。

The diverse circuit is for eliminating disturbance signal of other radars. This article elaborates the application and work principle of diverse circuit, and the actual work process.

13. 显式冗余无助于提高电路性能,反而增加功耗,降低电路的可测试性,使电路面积增大,应予消除。

Explicit redundancy can not improve the performance, but increases power consumption, enlarges circuit area and decreases its testability, so it should be removed.

14. 将微带电路向空间的辐射作为一个端口来处理,成功地消除了由于忽略电路的空间辐射效应引入的电路数字模拟误差。

The errors caused by omiting of electromagnetic radiations of opened microstrip in numerical simulating of microstrip circuits is eliminated successfully by making one circuit port of the radiation.

15. 本文以两级阻容耦合放大电路实验为例,分析了干抚产生的原因,强调了在实验中应注意干扰的产生和消除。

The paper is to analyse how the interference produced in a two-step resistance capacitance coupled amplifier circuit experiment and show importance of its product and disappearance in the experiment.

16. 本系统装备有“PILOTONE”和最新的“噪音锁”双重消杂音电路,当接收器在它的待命状态时,它可消除随机的噪音干扰。

This system is also equipped with "PILOTONE" and the latest "NOISE LOCK" dual-squelch circuit that will eliminate the random noise interference when the receiver is at its standby state.

17. 本论文设计了高速线阵CCD的驱动电路,并采用相关双取样的方法消除噪声。

The paper design a driving circuit of high speed linear CCD, and adopt correlation double sampling method to decrease the noise.

18. 设计了一款用于单片集成dc - DC转换器的简洁而高效的软启动电路,该电路消除了芯片启动时的过压冲击并有效地降低了浪涌电流。

A compact and well performance soft star circuit is designed for monolithic DC-DC converter to eliminate strike-voltage and depress surge-current.

19. 柱面散光轴位角进行手动测量,数码显示的数字化屈光度测量仪。本仪器采用特殊的处理电路,消除了外来噪声产生的误触发脉冲及输出错误积累而引起的位置偏移。

This instrument has a rotary encoding and raster and it has a special processing circuit not only eliminating trigger pulse case by noise but also clearing up position accumulates error.

20. 因此,迫切需要寻找一种方法,使得能够在物理设计完成之前查找、发现并在电路设计过程中消除或减小这些问题的影响。

Therefore we urgent needs to seek for one method, enables search, discover and eliminate or reduce the influence of these questions in the circuit design process.

21. 为了消除浪涌电流的影响和降低对输入电容的要求,电路也具有软启动控制功能;

In order to eliminate the impact of the inrush current and lower the input capacitance value, the circuit has soft-start control function.

22. 在该基波抑制电路中设计了中和电路,消除了分布电容的影响,提高了基波抑制电路的应用范围。

The designed neutralization circuit reduces the effect of distributed capacitance and expands the application scope of the fundamental suppression circuit.

23. 文章介绍了电路结构和工作原理以及消除引线电阻、电阻应变片的温度漂移和直流稳流电源供电质量对测量准确度的影响等问题。

It introduces circuit structure, operating principle and solves problems of temperature shift and dc constant-current power supply quality effect on measuring accuracy.

24. 霓虹灯电子变压器高频辐射消除装置由二极管组成桥式电路和电容组成。

The utility model relates to a high frequency radiation eliminating device for electronic transformer of neon lamps, which is composed of a bridge circuit which is composed of diodes and a capacitors.

25. 而对于SPWM逆变,采用数字电路实现SPWM触发脉冲的生成,在消除谐波、提高开关频率、简化电路结构,提高集成度和可靠性等方面,取得了很好的效果。

The digital circuits are introduced in the SPWM inversion, which have brought the elimination of harmonics, high switching frequency, simplified circuits and high reliability.

26. 通过对帘栅电路的分析,说明对此电路必须作很好的处理以消除故障和防止寄生振荡。

An analysis of screen grid circuit shows that it must be carefully treated to avoid troubles and parasitic oscillations.

27. 上面这个电路的另一个优点在于,当电容c1充电完毕后,输入电阻将趋于无穷大,因此可以消除因信号源内阻产生的误差。

An additional advantage of this connection is that input resistance approaches infinity as the capacitor C1 approaches full charge, eliminating errors due to loading of the source resistance.

28. 上面这个电路的另一个优点在于,当电容c1充电完毕后,输入电阻将趋于无穷大,因此可以消除因信号源内阻产生的误差。

An additional advantage of this connection is that input resistance approaches infinity as the capacitor C1 approaches full charge, eliminating errors due to loading of the source resistance.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!