
词语导航
基本信息
词语:辊轴承
繁体:輥軸承
拼音:gǔn zhóu chéng
英语翻译
【机】 roller bearing
分词翻译
辊的英语翻译:
roller
轴承的英语翻译:
bearing
【化】 bearing
翻译例句
1. 避免工作辊轴承座形成凹坑。
The formation of pits on the working roll bearing support can be avoided.
2. 压辊轴承外置,免加黄油。
Press roll bearings external design, grease free.
3. 该机设分离式前辊轴承座。
The separation type front bearing seat is convenient to mainenance.
4. 备品备件,大型工作辊、支撑辊轴承座。
Continuous Casting Mill Spare Parts, Large work rolls, supporting roller bearing.
5. 目前我国托辊轴承已开始用冲压轴承座代替原铸铁轴承座。
Cast iron bearing housing for conveyor idlers is being replaced by pressed housing in our country.
6. 轧机的上、下工作辊通过上、下工作辊轴承座安装在牌坊的中部。
The upper and down working rollers of rolling machine are installed in the middle of the housing window through upper and down roller base.
7. 四辊轧机工作辊轴承及支承辊止推轴承失效的主要原因是轴向力过大。
The axial overload is the main factor which causes work roll bearings and back up thrust bearings of four high mill invalid.
8. 一旦上路,它便展现出硬朗,粗旷的本性。 它的轧辊轴承架占据了整个后座。
Once there, it is hard and brutish; a roll-cage occupies the rear seat.
9. 在此基础上,设计制作了托辊轴承座双腔模具及CP-DMC模压料预压模具。
After studying on the molding technology, this paper designs a mould of bearing base and a mold for prepress of CP- DMC.
10. 安全片装在前辊轴承与调距螺杆之间,它用铸铁制造,其灵敏性高,容易被破坏。
Safety of installed in the front roll bearing and the distance between the screw, it cast iron manufacturing, the sensitivity is high, easy to be destroyed.
11. 永磁除铁器的主要注油处:转动轴承,轧辊轴承,所有齿轮,活动轴承、滑动平面;
The permanent magnetic separator of the main oil: rolling bearing, roller bearing, all gear, a movable bearing, sliding plane;
12. 本实用新型涉及一种轧机立辊轴承装置,它特别适用于热轧带钢轧机立辊轴承装置。
The utility model relates to a vertical roll bearing device for rolling mills, and the vertical roll bearing device for rolling mills is especially suitable for hot-rolled strip steel.
13. 为满足托辊轴承性能要求,首先在保持架的材料选取及保持架结构设计上进行了改进。
Therefore, supporting roller bearings have some specified requirements for rotating resistance and anti-sticking lifetime.
14. 轧钢机轧辊轴承采用带密封圈的四列圆锥滚子轴承,介绍密封圈的安装部位和结构形式。
The mill roller bearing adopted in rolling mill is four row tapered roller bearing with sealed rings. The mounting position and structure of the sealed rings are introduced.
15. 简要介绍轧辊轴承类型,分析其特点,提出了支承辊轴承的改进方法,延长了它的使用寿命。
The types of roller bearing are introduced and it"s characteristics are analysed. Meanwhile, improving ways of backing bearing are put forward and it"s service life is extended.
16. 四辊轧机工作辊轴承和支承辊止推轴承失效的主要原因是它们在工作中所受的轴向载荷过大。
The axial overload is the main factor which causes work roll bearings and back-up thrust bearings of four-high mill invalid.
17. 主要振因是当工作辊轴承座与牌坊之间间隙过大时,接轴弧形齿的啮合冲击将激起轧辊横向振动。
The vibrations are caused by spindle curved tooth meshing impact when the gap between work roller bearing block and frame is oversized.
18. 实际生产中铝带材冷轧机和铝箔轧机易于发生由于工作辊轴承箱温度过高而造成的火灾和设备事故。
In practical production, it is easy to take place the fire and equipment accidents due to super temperature of work roll bearings box in aluminum cold rolling mill and foil rolling mill.
19. 支承辊轴承座是轧钢机上的关键零件之一,也是重要零件和加工周期长、难度大、精度要求很高的零件。
The backup roll chock is one of the key and important parts of the rolling mill.
20. 支承辊轴承座是轧钢机上的关键零件之一,也是重要零件和加工周期长、难度大、精度要求很高的零件。
The backup roll chock is one of the key and important parts of the rolling mill. It has a long machining duration and the accuracy of the machining is very high.
21. 同时,设在上下支承辊装置侧面或机架上的压紧缸、腰块上的移动缸可实现轧辊轴承座与机架间的无间隙轧制。
In addition, using the hold down cylinder, the waist block and the shift cylinder can realize gap-less rolling.
22. 它的主要技术指标超过了日本极压锂基脂,使用寿命超过国产同名润滑脂的六倍以上,填补了国内轧辊轴承润滑脂的空白。
The main technical index of it exceeds the extreme pressure lithium grease from Japan, and the lifespan of it is six times longer than the same product in China .
23. 碎土辊轴承和车轮轴承涂抹润滑脂。过多的涂抹润滑脂可能导致油封的损坏和减少轴承的寿命。周期性地给铰接点涂抹润滑脂。
Grease reel bearings and wheel bearings sparingly. Over greasing may cause damage to seals and reduce the life of bearing. Grease hinge points periodically.
24. 介绍TOTAL 复合磺酸钙基脂在2050热轧工作辊轴承上应用的成功事例,详细地叙述了应用的全过程、使用的工具及应用后的经济效益。
The successful case for using TOTAL Calcium Sulfonate Complex grease in 2050 hot rolling working bearings and the process, using tools and economic benefit are introduced.
25. 工作辊轴向力过载是导致轴承烧损的主要原因。
Overloading of axial force acted on working roll is the primary reason to cause the bearing damage.
26. 从不同的角度分析了几种典型的磨粉机磨辊固定方式:磨辊轴与轴承间采用紧定套的连接方式适合用于低成本的小型单式磨粉机;
Several typical fixing methods for mill roller are analysed: tightening sleeve between roller shaft and bearing is suitable for small-sized mill with low cost;
27. 从不同的角度分析了几种典型的磨粉机磨辊固定方式:磨辊轴与轴承间采用紧定套的连接方式适合用于低成本的小型单式磨粉机;wWW.WeNTiyI.coM
Several typical fixing methods for mill roller are analysed: tightening sleeve between roller shaft and bearing is suitable for small-sized mill with low cost;
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
