等热力用英语怎么说,等热力的英文翻译


词语导航

基本信息

词语:等热力

繁体:等熱力

拼音:děng rè lì

英语翻译

【医】 isodynamia

分词翻译

等的英语翻译:

class; grade; rank; wait; when
【机】 iso-

热的英语翻译:

ardent; caloric; craze; eager; fever; heat; hot; warm
【化】 heat
【医】 calor; cauma; febris; fever; fievre; heat; hyperthermia; hyperthermy
phlegmasia; phlegmonosis; pyreto-; pyro-; therm-; thermo-

力的英语翻译:WWw.wentiyI.coM

all one"s best; force; power; puissance; strength
【化】 force
【医】 dynamo-; ergo-; force; potency; potentia; Power; stheno-; strength; vis

翻译例句

1. 的热容,熵,升华焓等热力学函数,并与实验值进行了比较。

The standard heat capacity, entropy, sublimation enthalpy of graphite.

2. 同时,为了与前人的结果进行比对,我们还计算了第一激发能隙和磁化率等热力学量结果。

In order to compare with the previous work, some numeric results of the first excitation gap and susceptibility are also given.

3. 注气将改变原有油藏体系的组分、组成等热力学条件,使原油的一系列物理、化学性质发生改变。

Gas injection will change physical and chemical properties of a system caused by thermodynamic condition variation in the process of gas injection.

4. 完成了汽轮机、蒸发器、汽水分离器、管道等热力系统典型设备模块的开发工作,并进行了相应的系统测试和应用研究。

The modules of important thermal power system equipments such as steam turbine, evaporator, steam-water separator and pipe are developed. System testing and application works are also completed.

5. 詹姆斯·麦克斯韦尔被认为是现代物理之父,他在电学、热力学、光学、核能等很多方面都有建树。

Acclaimed by some as the father of modern physics, James Clerk Maxwell is a hugely influential figure in the fields of electricity, thermodynamics, photography, nuclear energy, and others.

6. 并根据热力学理论、流体力学等理论,运用仿真技术对冷藏集装箱制冷系统主要部件和冷藏集装箱冷藏室内的流场温度场建立数学模型和进行模拟仿真。

Then. based on the theory of thermodynamics and the theory of hydrodynamics, applying simulation technique to theorize mathematics model of the key component of refrigerated containers .

7. 第一个问题涉及热力学,第二个问题涉及各种速率过程——化学动力学,传热等。

The first question concerns thermodynamics, the second the various rate processes- -chemical kinetics, heat transfer, etc.

8. 实验表明流型及重力等对单回路系统的热力性能有着重要的影响。

The results show that the thermal performance is strongly dependent on the flow patterns and gravity.

9. 水,电,气,热力,通讯,污水处理,场地平整等设施完备。

Water, Power, Gas, Heating system, Drainage, Communication and Flatted land are available.

10. 本文在稳态模型和局域热力学平衡等假设下,推导了在纵向磁场下真空电弧压力的数学表达式。

This paper derives the mathematical express on of the pressure of vacuum arc subjected to an axial magnetic field under stationary model and the assumption of local thermodynamic equilibrium etc.

11. 该系统适用于发电厂、热力公司、炼油厂、化工厂、石油输油系统等可能出现电化学侵蚀的行业和部门。

The system is applicable to power plants, heat companies, oil refineries, chemical plants, oil pipeline systems that may arise electrochemical erosion of industry and department.

12. 应用生化过程、热力学和动力学等的工程学原理,用以分析、设计并改进利用生物催化剂的生产过程。

Biochemical processes, thermodynamics, and kinetics are used in the application of engineering principles to analyze, design, and develop processes using biocatalysts.

13. 应用该方法可以给出轧件变形过程中诸如温度场、应变场和应变速率场等各种热力结果。

The model can be used to predict the thermal and mechanical data such as temperature, strain, strain rate distributions.

14. 还计算了体系的其它热力学性质,如溶解焓等。

Some thermodynamic properties, such as solution enthalpy, have been calculated.

15. 将循环函数法进行了改进、并应用到实时热力计算中,应用实例表明此种方法概念明确、结果准确、容易在实时计算中实现等特点。

CFM is improved and used for online thermal calculation. The example shows that the method is simple, accurate and can easily be realized in online calculation.

16. 成矿流体的研究主要包括流体的广域穿层效应,地幔流体成矿作用,成矿流体热力学、动力学等几个方面。

The research of ore-forming fluid includes large-scale translayer effect, mantle metallogenetic process, fluid thermodynamics and dynamics of fluid.

17. 从结冰过程的基本方程出发,并要求在缩比相似准则中满足几何尺寸、流场、水滴运动及撞击特性、结冰过程的热力学特性等相似,推导出一种适合结冰试验的相似准则。

To achieve similarity in ice accretion, it is necessary for the scale test to simulate the geometry, the flow field, the drop trajectories, the total water catch and the heat transfer.

18. 文中给出了油、气、水管网系统的水力、热力参数,包括流量、含水率、压力、温度、比热等的计算方法。

A method of calculating hydraulic and thermodynamic parameters such as flow, ratio of water in oil, pressure, temperature, specific heat for oil, gas, water pipe net is presented.

19. 本文所考虑的三源热力循环设备包括:吸收式制冷机、太阳能制冷机和两类三源化学泵等。

The thermodynamic cycle equipments considered in this dissertation include absorption refrigerators, solar refrigerators, two classes of three-source chemical pumps and so on.

20. 排风口位置的变化,对下层气流速度场、温度场以及烟气浓度场不产生影响,对热力分层高度、工作区垂直温度分布等热舒适性问题没有影响。

Air outlet position didn"t influence the air flow field temperature field, concentration field, heat lamination height and vertical distribution of temperature of work area.

21. 运用现代分析技术对辛烯基琥珀酸淀粉酯的颗粒形态、晶体结构和热力学性质等进行了分析。

The granules morphology, crystal structure and thermodynamic properties of OSA starch were analyzed by the modern analytical techniques.

22. 针对粉末多孔材料,采用体积可压缩刚粘塑性热力耦合有限元法对其等径角挤压过程进行模拟分析。

The densification and deformation behavior of porous materials during the ECAP process were investigated by (thermo -) mechanical coupling finite element method.

23. 超薄反射镜具有重量轻的优点,但它极易受各种力学、热力学等环境的影响,因而其面形易发生变化。

Although a membrane mirror has a light weight, its surface is easily deformed due to certain mechanical and thermodynamic factors.

24. 化工原理,化工热力学和物理化学等基础课程,并取得优异的成绩。

Chemical Engineering, chemical thermodynamics and physical chemistry and other basic courses, and achieved excellent results.

25. 相变对矿物和岩石的物理性质有重要影响,会导致电导率、弹性波速、热力学、流变学参数的异常和产生相变磁效应等。

It exerts an important influence on mineral physical properties, such as resulting in the abnormalities of conductivity, elastic wave velocity, thermodynamics and magnetic effect and so on.

26. 筛选出传热系数、烟气中的固体颗粒浓度、燃料的燃烧份额等需要凭经验取值的热力参数,推导了区段热量衡算的通用计算公式。

It picked out heat transfer coefficient, ash concentration in smoke, fuel percentage and other parameters based on experience, summed up general formulas for heat balance in furnace section.

27. 本文阐述了一种新型的热水型吸收式冷水机组,即热水两阶一体型吸收式冷水机组,并对其原理、热力计算优化等作了详细介绍。

This paper introduced a new hot-water absorption chiller, the two-stage integral chiller, specially designed for combined cooling, heating and electric power generation.

28. 对常用的热力除氧、真空除氧、炉内加药除氧、解吸除氧等技术进行了分析,指出了各种方法的优缺点和适用范围。

This paper analyzes the common deoxidize methods of heating power, vacuum, adding medication in furnace and desorption, points out the advantages, shortcomings and usage range of every methods.

29. 对常用的热力除氧、真空除氧、炉内加药除氧、解吸除氧等技术进行了分析,指出了各种方法的优缺点和适用范围。

This paper analyzes the common deoxidize methods of heating power, vacuum, adding medication in furnace and desorption, points out the advantages, shortcomings and usage range of every methods.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!