坡口用英语怎么说，坡口的英文翻译

词语导航

基本信息

词语：坡口

繁体：坡口

拼音：pō kǒu

英语翻译

【化】 groove

相关词条

1.bevel  2.groove  

分词翻译

口的英语翻译：

cut; gob; jaws; mouth; opening; ostium; scoop; stoma
【医】 aditus; apertura; aperturae; aperture; bouche; introitus; meatus; mouth
opening; ora; orifice; orificium; oro-; os1; ostia; ostium; portal
stoma; stomata; stomato-; trema

翻译例句

1. 安装方便简便，坡口作业快捷；

The installation is simple and convenient, groove assignment is fast.

2. 损坏的管端及坡口已被发现并修复。

The damaged bevel and pipe ends are identified and repaired.

3. 坡口——一种角度型式的边缘制备。

Bevel — an angular type of edge preparation.

4. 管子坡口机是用于起重机械的原材料。

Pipe beveling machine is used for lifting raw materials.Www.WenTIYI.COM

5. 安全阀入口焊接坡口尺寸由卖方提供。

Safety valve"s inlet butt end shall be supplied by seller.

6. 坡口清理完成，尺寸正确。

The bevel is cleaned and the dimensions are correct.

7. 坡口切割机器人：用于工程机械等行业。

Bevel cutting robot: for engineering machinery industry, automatic cutting.

8. 设计了用于油气田管道坡口切割的角度铣刀。

The bevel milling cutter for cutting groove of oil casing - pipes was designed.

9. 设计了用于油气田管道坡口切割的角度铣刀。

The bevel milling cutter for cutting groove of oil casing-pipes was designed.

10. 经试验证明该装置用于带坡口焊缝的自动跟踪是可行的。

The tests show that automatic tracking of weld with groove is feasible.

11. 本文主要介绍了一种新形式焊接等径三通坡口的加工方法。

The paper introduces the manufacure process for the groove of a new form welding straight tee.

12. 提出了一种V型坡口光纹提取以及计算焊接纠偏量的方法。

A method for detecting the image edge of V-groove and calculating the welding deviation was presented.

13. 至少在四座桥梁的翼缘板和腹板拼接坡口焊缝中发现了裂纹。

Cracks have been found in the flange and web splices at groove welds in at least four Bridges.

14. 因此，许多门式数控切割机上都安装了等离子坡口切割装置。

Therefore, many door type nc cutter are installed on plasma cutting device groove.

15. 建立了焊接方法选择、焊材选择和坡口选择的计算机推定模型。

The computer reasoning models of selecting system of welding method, welding material and welding groove were established in the paper.

16. 使用数控切管机切割带焊接坡口的相贯线时，手工编程效率低下。

Manual programming is inefficient when using CNC pipe cutting machine cuts intersection lines with welding groove.

17. 发生这许多裂纹是因为把这些坡口焊接部件作为次要构件或附件考虑。

A large number of these cracks occurred because the groove welded component was considered a secondary member or attachment.

18. 试验结果表明：改进型坡口优于V型坡口，利于保证和提高焊缝质量。

The results of experiment also show the improved groove is better than V type groove and can assure the quality of welding.

19. 提出了最大Z坐标原则求管-管、板相贯线坡口切割割炬轨迹的方法。

The principle of Z-max was also proposed for the intersecting curve of pipe-pipe-plate.

20. 从坡口形式、加工方法的选定、坡口加工过程等方面进行了详细的介绍。

The form of the groove, the selection of manufacure process and the process of manufacture of groove are introduced detailedly.

21. 运用直方图均衡化方法强化坡口与非坡口的差别，增加焊缝图像的理解性。

To better understanding the weld image, the histogram equalization method was used aiming at enlarging the difference between groove and other area.

22. 整机便携式的设计，能实现室内、野外只要有电源的任何场所进行管子坡口作业。

The portable design can realize indoor and outdoor grooving work, as long as there is power supply.

23. 此外，小车切割作为辅助切割工具与数控切割机配套使用，专门用来加工焊接坡口。

In addition, the car cut as auxiliary cutting tools and nc cutter, dedicated to supporting the use of processing welding grooves.

24. 本文阐述了焊接坡口和板厚处理对钣金加工制造工艺的影响，并用合理的方式设计和处理。

This paper discusses how the weld groove and the plate thickness affect the sheet metal manufacture processing, and how to design with reasonable method.

25. 咱们可以对管子进行下面所开列预制加工：割切以及机械加工坡口，手工以及自动烧焊等。

We can perform the pipe by following operations: cutting and mechanical chamfering, manual and automatic welding.

26. 等离子切割有其独特的优点，利用等离子进行坡口切割，以经济角度来看，变得越来越重要。

Plasma cutting has its unique advantages, using plasma cutting groove on, with economic point of view, is becoming more and more important.

27. 并以基于PC和运动控制卡的开放式四轴数控系统实现支管端头的变角度焊接坡口面切割。

The open four-axis CNC system based on PC and motion control card can accomplish the cutting of various-angle welding plate.

28. 数据库中未存储相关的焊道尺寸时，可能提供一个关于坡口设计及规范选择的标准施工方案。

To obtain a standard scheme for groove design and parameters selection without the related bead geometry stored in the data libraries.

29. 对筒型压缩机的圆柱形出风管焊接坡口加工工艺进行了探讨，提出了解决该问题的有效方法。

Research is carried out on weld groove machining technology of cylindrical duct outlet for barrel compressor, the effective method of solving the problem is put forward.

30. 在螺旋焊管生产中采用铣边机铣削带钢边缘和坡口，为螺旋焊管成形、焊接创造了有利的条件。

To adopt milling machines to prepare strip edges and groove to give good condition for forming and welding of spiral submerged arc-welded pipe.