
词语导航
基本信息
词语:聚合泵
繁体:聚合泵
拼音:jù hé bèng
英语翻译
【化】 polymer pump
分词翻译
聚合的英语翻译:
aggregation; converge; group; polymerization
【化】 polymerization
【医】 polymerism; polymerization; polymerize
泵的英语翻译:
pump
【化】 pump
【医】 pump
翻译例句
1. 三道机械密封防止介质的泄漏,同时泵内部的高度抛光降低了对形成的聚合物链的损害。
A sophisticated triple mechanical seal system prevents leakage of the pumped fluid whilst highly polished pump internals minimize damage to the forming polymer chains.
2. 研究结果为聚合物齿轮泵的间隙优化设计及漏流特性提供了重要的理论依据。
The research results provide an important theoretical basis for the optimal design and leak properties of the clearances of polymer gear pumps.
3. 在聚合物加工中使用熔体齿轮泵可以提高生产效率和产品质量,降低生产成本。
By using melt gear pump, production efficiency and product quality can be improved and production cost can be reduced in the polymer processing.
4. 试验和计算实例表明,随着聚合物浓度的增加,阀球开启滞后角度增大,泵充满系数降低。
The experiment and calculating example show when concentration of polymer solution increases angle of lag of valve ball opening increases and pump admission coefficient drops.
5. 介绍了熔体齿轮泵在聚合物加工中的性能与特点,列举了用于塑料、橡胶挤出的熔体齿轮泵的用途和特点。
The performance and feature of melt gear pump in the polymer processing was introduced, and the purpose and characteristic of melt gear pump for plastic and rubber extrusion was listed.
6. 本文以某一熔体泵为例,探讨了熔体泵的工作原理,给出了聚合物熔体泵的设计原则。
Taking the specified melt pump as a example, its working theory was discussed, and some principles of design were introduced.
7. 化学泵适用于低粘度物质的输送和定量,应用范围包括在化学制药业的输送和定量任务,以及聚合物生产中单体,低聚物,预聚物的输送。
Application % areas: transportation and quantitative tasks in transportation chemical and pharmaceutical industry, as well as polymer production of monomers, oligomers, prepolymers.
8. 重新循环泵用来不断搅拌聚合物。
A re-circulating pump is used to continually move the polymer.
9. 用逆转录-聚合酶链反应(RT - PCR)方法检测主动外排泵基因CDR1和CDR2的表达水平。wWW.WEntIyI.coM
Reverse transcriptase-polymerase chain reaction (RT-PCR) was used to measure the mRNA levels of active efflux gene CDR1 and CDR2.
10. 研究了有机聚合物微腔在光泵浦下的腔效应。
The cavity effects of organic microcavity under photo-pumping were studied.
11. 在注聚泵的设计过程中,如何保持聚合物的粘度特性也成了设计者主要研究的目标。
In the designing process of polymer injection pumps, how to maintain the viscosity characteristics of polymers has become a major research goal.
12. 从探讨丙烯聚合工艺中环管反应器流体动力学模型着手,介绍环管反应器循环泵功率的计算方法。
A fluid dynamical model of the materials in a loop reactor for polypropylene production is suggested and the power of the circulating pump of the reactor is calculated by means of Newitt correlation.
13. 针对注聚合物驱油的工艺要求,研制了新型凸轮机构恒流量往复泵。
According to the requirement of the technology, a new type of reciprocating pump with cam-drive mechanism resulting in the constant flow was designed.
14. 随着大型聚合物生产装置的迅猛发展,高参数齿轮泵的应用日益广泛。
The high parameter gear pump for polymer proceeding is an important branch of gear pump technology, and it is used more and more frequently with the great increase of the polymer equipment.
15. 研究泵注聚合物—部分水解聚丙烯酰胺的流变性。
This paper focus on the rheology characteristics of the medium-HAPM which pumped by the polymer injection pump.
16. 研究泵注聚合物—部分水解聚丙烯酰胺的流变性。
This paper focus on the rheology characteristics of the medium-HAPM which pumped by the polymer injection pump.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
