平面刀具用英语怎么说,平面刀具的英文翻译


词语导航

基本信息

词语:平面刀具

繁体:平面刀具

拼音:píng miàn dāo jù

英语翻译

【机】 facing tool

分词翻译

平面的英语翻译:

flat; plane; surface
【医】 flat; plane; planum

刀具的英语翻译:

【化】 cutter; cutting-tool; tool

翻译例句

1. 斜面上钻孔与平面上钻孔相比,由于加工初期条件差,孔的相对位置精度低,刀具更容易折损。

Drilling on inclined surfaces has such problems as the decrease of hole accuracy and damage of tools compared with the drilling on flat surfaces.

2. 仿型刨削和牛头刨削用单刃刀具加工平面。

Shaping and planing produce flat surfaces with a single-point cutting tool.

3. 本文基于刀具路径几何仿真,研究了平面曲线轮廓数控加工进给速度优化技术,这种优化技术是智能化数控加工编程的基础。

The paper presents a systematic technology of feed rate optimization on CNC planar profile milling based on geometric simulation of tool path which is the base of intelligent CNC programming.

4. 把隐函数的优势应用到数控加工编程中,即对于截面法的数控加工,求出刀具切削平面与隐函数曲面的加工轨迹,再用正负法绘制刀具轨迹曲线。

For NC machining of plane section method, the machining path of tool cutting plane and implicit surface can be found, and the curve of the tool path is drawn by the positive-negative method.

5. 本机床主要适用于高速钢、硬质合金及陶瓷刀具切削加工黑色金属、有色金属及部分非金属零件的内外圆柱面、内外圆锥面、沟槽、平面。

This series machine is suitable of ferrous, nonferrous metal and some kinds of non-metal materials with hard alloy, high capacity and high speed steel tools.

6. 本文从实用出发,系统介绍了适用于制作大型平面材料的切削性能以及适用于大型平面精铣的几种刀具结构和使用情况。

This article states machined properties of part"s material, properties of cutting tool materials and some structure of cutting tool that used in large flat surface.

7. 型刨削和牛头刨削用单刃刀具加工平面。

Shaping and planing produce flat surfaces with a single-point cutting tool.

8. 给出了刀具标注角度参考系平面与工作角度参考系平面之间的关系式。

The paper shows the clear relationship between the reference planes for the nominal angles of the cutting tool and the planes for the working angles of the cutting tool.

9. 介绍了廉价的微处理器刀具磨床数控系统,及其产生平面轮廓的插补算法,以及相关硬件。

The paper introduced the numerical control system of tool grinding machine operated by a cheap microprocessor, the interpolation algorithm of its plane contours, and related hardware as well.

10. 同时,这些刀具的平面角必须始终与螺纹形状的平面角保持一致。

Also, the plane angles of these tools must always be identical to those of the thread forms.

11. 被加工平面为大平面,材料为HT250,故刀具选择硬质合金端铣刀。

Is processed the plane is the big plane, the material is HT250, therefore cutting tool choice hard alloy face cutter.WWW.wENTiyI.Com

12. 切削刀具旋转时,曲线形刀具刃口的运动轨迹形成一个平面。

When the cutter is rotated, the moving track of the curved cutter edge forms a plane.

13. 由于现代数控刀具都设计有卷屑槽,从而使其前刀面不是平面,而是曲面。

Because there exists a chip-curling groove on the rake face, the rake face of a modern cutting tool used on NC machine tool is not a plane, but a curved surface.

14. 本实用新型解决了现有模切机需在被冲压物下面进行铺垫才能使刀具切割平面与被冲压面平行的问题。

The utility model solves the problem of the existing die cutter needing the bedding under the stamping-out object to keep the cutting plane of the cutter parallel with the stamping-out plane.

15. 本实用新型解决了现有模切机需在被冲压物下面进行铺垫才能使刀具切割平面与被冲压面平行的问题。

The utility model solves the problem of the existing die cutter needing the bedding under the stamping-out object to keep the cutting plane of the cutter parallel with the stamping-out plane.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!