进料管用英语怎么说，进料管的英文翻译

词语导航

基本信息

词语：进料管

繁体：進料管

拼音：jìn liào guǎn

英语翻译

【化】 feed pipe; spout feeder

分词翻译

进料的英语翻译：

【化】 charg(ing) stock; charge-in; feed; input material

管的英语翻译：

canal; duct; fistula; guarantee; meatus; pipe; tube; wind instrument
【化】 pipe; tube
【医】 canal; canales; canalis; channel; duct; ductus; salpingo-; salpinx
syringo-; tuba; tube; tubi; tubing; tubo-; tubus; vas; vaso-; vessel

翻译例句

1. 加热器的工作是预防装置进料管中的联氨燃料冻结。

The heater"s job is to prevent hydrazine fuel in a feed pipe to a unit from freezing.

2. 包括壳体、电机、转子、导风叶片、旋风筒、进料管和汇风管；

The multistage powder selecting machine comprises a shell, a motor, a rotor, wind guide blades, cyclone cylinders, a feeding pipe and a wind converging pipe;

3. 撕裂了现有的进料管，摊位，槽和整个四英尺深基坑后仍然是一个巨大的贝壳。

After tearing out the existing feed pipes, stalls, troughs, and, the entire four foot deep foundation a giant shell remained.

4. 碱液经扁喇叭形注碱管注进进料管既可以使碱液同柴油均匀混合，又能避免激烈搅动使柴油乳化；

The aqueous alkali is injected into the input pipe through the horn pipe, which makes the aqueous alkali mix with diesel oil homogeneously and the emulsion of diesel oil is avoid.

5. 改进工具包括一台必需的水泵，进料管与出料管和一套可以阻止研磨介质通过而泥浆可通过的栅格系统。

The retrofit kit includes the necessary pump, incoming and outgoing hoses, and a grid system, which restrains the grinding media while allowing slurry to pass through.

6. 并提出了减缓阻垢剂进料管环烷酸腐蚀的措施，主要包括选用更耐蚀的316或316l材质以及改进三通结构等。

Effective measures are recommended to control the naphthenic acid corrosion of the pipe, including selection of corrosion-resistant 316 or 316l steels and modification of tee construction.

7. 在投产不久的时间内，广东金湾发电厂两台炉磨煤机的石子煤斗进料管经常发生堵管，通过对石子煤斗进行改造，加强冲渣，消除了堵管问题。

The feed pipe was always chocked up at the cobble coal bunkers of two pulverizers in Guangdong Jinwan power plant before long its putting into production.

8. 供料桶内的物料被大气压力压入出进料软管，通过进出料的三通管进入料缸。

Then the material in the feeding tank enters the feed hose and the charging cylinder via the tee piece under atmospheric pressure.

9. 提升管的进料段是裂化反应最复杂的区域。

The most complex part of RFCC is in the feed injection zone.

10. 塔盘供货商应对塔盘的详细设计负责，包括下降管。塔盘供货商也应对回流及进料分布器设计供货。

Tray vendor shall be responsible for detailed tray design including downcomers. Tray vendor shall also design and supply reflux and feed distributors.

11. 采用浮游催化法喷雾进料技术制备碳纳米管。

Carbon nanotubes have been obtained by the floating catalyst method using the feedstock spray technique.

12. 采用脱氮活性高的RN-2催化剂对管输油的焦化蜡油进行加氢处理，脱除其中的氮、硫等杂质及改善烃类组成后，进行催化裂化或与直馏蜡油混合作催化裂化进料。Www.WENtiyi.COm

CGO were hydrotreated by RN 2 catalyst to remove N and S impurities and improve the quality. The hydrotreated CGO was proposed to be mixed with VGO as FCC feedstock after testing in the pilot plant.

13. 大型松紧调节臂不断从进料加工过程中反向弯曲的材料速度与管张力通过计算机自动调整。

Large dancer arm keeps material from being reverse-bent during the feed process Speed and tube tension are auto-adjusted by computer.

14. 流体在槽式液体分布器进料预分布管中的流动属于分支流系统，其流型复杂多变。

The flow in feeding pre-distributed pipes of slot liquid distributor is divergent streams, and its flow pattern is very complicated.

15. 有三种设备类型：重力式、下部进料式和管式。

Equipment is available in gravity, underfeed and pipeline models.

16. 管式加热炉采用“冷进料、热油预热空气”以提高热效率，受到了广泛的注意。

Heaters with feed and air preheated by hot flue gas and hot residue oil respectively have attracted extensive attention.

17. 通常是串接在杀菌机的保持管后，进料温度摄氏90度左右，具体接法请参考工艺流程图。

Usually connected in series to maintain the tube in the sterilizer after the feed temperature of 90 degrees Celsius, the specific access method, please refer to flow chart.

18. 原料通过自动进料装置进入到下料管，下料管是透过分离器的侧面或中间进入到磨机内部的。

The raw material goes into the tremie pipe through the automatic feeder. The tremie pipe extends into the inside of the mill through the concentrator" s side or center.

19. 原料通过自动进料装置进入到下料管，下料管是透过分离器的侧面或中间进入到磨机内部的。

The raw material goes into the tremie pipe through the automatic feeder. The tremie pipe extends into the inside of the mill through the concentrator" s side or center.