
词语导航
基本信息
词语:铸法
繁体:鑄法
拼音:zhù fǎ
英语翻译
【医】 casting; casting method
分词翻译
铸的英语翻译:
casting; founding
法的英语翻译:
dharma; divisor; follow; law; standard
【医】 method
【经】 law
翻译例句
1. 叙述了上引连铸法的优势及改进产品质量的对策。
The superiority of up-drawn continuous casting and the measures to improve the quality of products are related.
2. 他厌恶焊接法并尽量避免使用,并认为铜铸法步骤太多抹杀了真实性。
He hated welding and shunned it. He felt bronze casts were too many steps removed from the real thing.
3. 再次,学生应当注意外教常用的隐性纠错方式(特别是重铸法和请求澄清法)。
Second, NE teachers are important in helping students notice their errors and aiding them to self-correct.
4. 采用铜模吸铸法,制备出管状非晶态合金Fe36Co36B20Si4Nb4。
Ringy amorphous alloy Fe36Co36B20Si4Nb4 is obtained by the method of copper mould suction casting.
5. 因此国外厂家对超高压交联聚乙烯电缆如果采用“挤塑模铸法”,目前均采取“分层次挤塑硫化”工艺方式。
Therefore, if the foreign plants adopt plastic extrusion molding for over-voltage crosslinked polythene cable, they currently adopt "plastic extrusion sulfuration by layers" method.
6. 本文在对蜗杆、螺杆类铜铸件的连续铸造方法进行试验的基础上,指出用上引连铸法生产此类铸件是行之有效的。
Based on experiments the production of screw type brass castings by upward drawing continuous casting is introduced in this paper.
7. 利用EBSD取向成像技术,分析了双辊连铸法生产的AI SI 304 奥氏体连铸薄带的两相组织结构及取向特点。
The structure of dual phase and orientation of AISI304 casting thin strip produced by twin roll caster were analyzed by orientation mapping based on EBSD technique.
8. 压汞法是定量研究砂岩孔隙空间结构特征参数的一种新方法,与铸体图象法相比,更具定量研究价值和实用价值。wWw.WENTiyi.Com
The pressuring mercury way is a new method to quantitatively study sandstone pore structure characteristic parameters. It has better quantitative and practical value than image way.
9. 首先分别简述了气体雾化法、熔体快淬法和铸带法制备储氢合金的微观组织结构特征和电化学性能。
Firstly, the microstructure and the electrochemical properties of hydrogen storage alloys prepared, respectively, by gas atomization, melt quenching and strip casting were presented.
10. 传统的TP2铜管生产方法——挤压法是由连铸实心铸坯挤压成管坯,再经过拉拔加工成管材。
The extrusion process is a traditional method for the TP2 copper tubes, in which continuous casting solid billet is extruded to hollow tube billet firstly and then drawn to tube.
11. 利用切块法分别推导出了铸轧过程上述两区的静力平衡微分方程。
The static equilibrium differential equation of the casting zones and rolling zones during roll casting process is deduced respectively using slab method.
12. 介绍连铸连轧法试制电解电容器用铝质负极箔的工艺研究过程。
We hereby give a brief introduction of the process using continuous casting& rolling method to produce aluminum cathode foil for electrolytic capacitor.
13. 介绍了连铸连轧法生产电解铜始极片的新工艺。
A description is made of new technology for producing starter sheets of copper electrolysis by continuous casting and rolling.
14. 利用有限元法研究了连续铸挤工艺中液态金属的动态凝固过程。
The solidification process of liquid metal in the CASTEX technique was studied by FEM (finite element method).
15. 本文是沸腾床热熔敷法对活塞隔膜泵铸铝工件耐农药涂装的初步总结。
Pesticide-Resistant coating by roasting in fluidized bed for aluminium cast of piston-diaphragm pumps is discribed.
16. 通过对铸焊齿轮的材料和结构的分析,利用“加热减应区”法及适当的装配焊接顺序,成功地焊接了异种金属的合金钢齿轮。
Through the analysis of material and construction, the dissimilar steel gear is successfully welded using stress reduction zone by heating and proper assemble and welding sequence.
17. 通过压汞法毛细管压力曲线和铸体图象分析方法分析孔隙、喉道大小、分布及其几何形状,建立孔隙结构模型。
With mercury injection capillary curve and thin section, hole porosity and throats with their shapes and distributions are studied and porosity structure model is set up.
18. 本文研究用快干涂料法来制造金属基表面复合材料的铸渗表面合金化工艺。
This article studied the Cast-in-face process of Fast-dry coatings for producing the metal matrix composites in face.
19. 通过有限元法三维数值模拟,对方坯连铸软接触结晶器系统中的电磁参数进行了计算。
Some electromagnetic parameters in soft contact continuous casting mold of billet were analyzed through 3-d FEM numerical simulation method.
20. 本发明还涉及一种用于制造连铸结晶器的部件的方法。
The invention also relates to a method for producing a component for a continuous casting mould.
21. 容量最大的造模法,通过高压的作用材料从外部加热室通过铸口、流道或浇口进入闭式压膜室。
The highest volume molding method, in which the material is forced from an external heated chamber through a sprue, runner or gate into a cavity of a closed mold by means of high pressure.
22. 用80C552单片机和光电码盘配合改进的M/T法,检测铸轧辊的执行电机转速可获得大范围内测速精度。
The Improved M/T method with 80C552 and a photo- electricity coder to measure electro-motor" s rotation speed can achieve a large scale of rotation speed measuring precision.
23. 通过生产实践中的工艺探索与经验总结,提出了铸轧法生产8014空调箔坯料的生产方法。
Production method of 8014 Al foil stocks for air-conditioner by cast-rolling method was put forward.
24. 对快干涂料法铸渗工艺进行了研究。
The quick drying coating cast-in-face process was studied.
25. 并可用于热模法铸态离心球铁管的生产。
The CB wash can be used to produce as-cast centrifugal ductile iron pipes by heated mold method.
26. 介绍日本钢铁生产中平炉炼钢法、转炉炼钢法、电炉炼钢法、炉外精炼法、不锈钢精炼法。着重论述了连铸生产技术。
Open hearth steelmaking, converter steelmaking, electric furnaces steelmaking, secondary steelmaking and stainless steelmaking in Japan are introduced.
27. 介绍了连铸连轧法生产电解铜始极片的新工艺。
Microstructure Simulation of Thin Slab Continuous Casting and Continuous Rolling(CSP)Process;
28. 介绍了连铸连轧法生产电解铜始极片的新工艺。
Microstructure Simulation of Thin Slab Continuous Casting and Continuous Rolling(CSP)Process;
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
