减震橡胶用英语怎么说,减震橡胶的英文翻译


词语导航

基本信息

词语:减震橡胶

繁体:減震橡膠

拼音:jiǎn zhèn xiàng jiāo

英语翻译

【化】 shock-reducing rubber

分词翻译

减震的英语翻译:

damping; shock absorption

橡胶的英语翻译:

balata; rubber
【化】 rubber
【医】 gum-elastic; rubber
【经】 rubber

翻译例句

1. 本文简要介绍了作者最近研制的新型减震橡胶支座及其滞回阻尼性能。

In this paper, a new aseismic rubber bearing, which was developed recently by the authors, and its properties are described.

2. 车架阳极氧化,小轮轴采用双轴承,带减震橡胶,较座,8“前轮,24”后轮,双支撑,附安全带。

Aluminum oxidation frame, soft cushion, 8 "front caster and 24" rear wheel, double brace, whit safety belt.

3. 减震插片:拍柄内置热塑性橡胶内核同热塑性弹性体,有效减少球拍震动。

Shock eraser insert: thermoplastic rubber core inside a thermoplastic elastomer butt cap is pressure fit into the shaft to reduce frame shock and vibration.

4. 水泵等震动设备与管道连接处,采用可曲桡橡胶接头及减震支吊架以减震降噪。

The connecting part between pump and network is equipped with flexible rubber joint and support suspended frame to reduce vibration and noise.

5. T1S橡胶鞋底可减震、吸收撞击力,保护足部。

T1S Rubber outsole absorbs shock and impact and protects the foot from the elements.wWW.wEnTiyi.COM

6. 同时通过野外的噪声检测,验证了橡胶粒沥青路面具有良好的减震降噪效果。

At the same time to implement the outdoor noise detection, it veri - ties that the rubber particle asphalt pavement has the good shock noise reduction effect.

7. 转向桥与车架体连接处增加橡胶减震垫,降低了整机的震动。

Responding to the connection with frame bridge rubber damping increased, reduce the mat of vibration.

8. 高密度的橡胶外底提供减震和耐用性,以维护您的坚固大步。

High-density rubber outsole provides shock absorption and durability to maintain your sturdy stride.

9. 利用慢变参数、时程分析和能量分析方法,探讨了铅芯橡胶减震支座(LRB) 的非线性动力性态。

Slowly parameter, nonlinear time response analysis and energy approach can be used to obtain the dynamic behavior of lead rubber bearing (LRB).

10. 用途:主要用于油封、轴套以及胶管、阀门、减震制品、印刷胶板、输送带、防水圈等橡胶配件。

Usage: mainly used as rubber accessories like oil seals, bearing suits as well as rubber ducts, valves, shock absorbing wares, printing rubber plates, conveyance belt and waterproof rings, and so on.

11. 结合橡胶支座基础隔震和调谐质量阻尼器的研究成果,提出了在超高层结构中应用非线性"调谐质量阻尼器"的减震技术。

It shows non-linear TMD damping-isolation technology in the super high-rise structure on the basis of research results of rubber bearing and tuned mass damper.

12. 还有旅行车、工程车、货车用橡胶减震、胶套及其它工程专用橡胶专用制品。

There are also shock absorbing, rubber sleeves, and other special products for engineering vehicles and trucks.

13. 橡胶因为具有高弹性和绝缘性,常被用来制作轮胎、减震器、密封圈和电绝缘材料。

Because of its high elasticity and electric insulation, rubber can be used in making tires, shock absorbers, airproof loops and electric insulation.

14. 目的为改善铅芯橡胶支座隔震结构的减震效果和适用范围,并确定结构的优化参数和控制装置优化布局。

In order to improve the effect of shock absorption and applied scope of base - isolated structure with lead rubber bearing and study its optimum parameter.

15. 橡胶由于具有高弹性和绝缘性,常被用来建造轮胎、减震器、密封圈和电绝缘原料。

Because of its high elasticity and electric insulation, rubber can be used in making tires, shock absorbers, airproof loops and electric insulation.

16. 本厂主导产品为:IVAK品牌旋转轴用骨架油封、O型圈,配套生产汽车、摩托车减震器用橡胶件。

Our leading products are: IVAK brand rotation axis with seal, O-ring, supporting the production of automobile and motorcycle shock absorber rubber parts.

17. 结合单层工业厂房的构造特点,将夹层橡胶垫隔震技术引入到单层工业厂房的设计中,并探讨了橡胶垫的减震效果和减震机理。

In this paper, the seismic isolation technique is used in seismic-releasing of the single-storey industrial building by use of laminated rubber bearing as link member between roof and column.

18. 真正的橡胶大底是灵活和减震。

Genuine rubber outsole is flexible and shock absorbing.

19. 采用优质橡胶制成的探路者七层复合减震大底,防滑、耐磨。

High quality rubber sole with good skidproof and wear-resistant.

20. 橡胶垫基础隔震技术作为一种有效的减震控制之一,在实际工程中得到了广泛的运用。

The rubber bearing base isolation as one of the effective control of damping systems has been widely used in the actual projects.

21. 发动机液压支承是橡胶和液压阻尼元件的组合,具有低频高阻尼、高频低刚度的特点。中高级轿车均采用这种结构的发动机减震零件。

Combined with rubber damping and hydraulic damping, with the performances of low-frequency high-damp and high-frequency low-rate, hydraulic engine mount is mostly used in luxury-class passenger cars.

22. 说明橡胶隔震垫适合多层房屋基础隔震的要求,框架模型加入橡胶隔震垫后减震效果明显。

The test results show that the rubber bearings can very well meet the needs of seismic isolation buildings, and reduce the seismic response of the steel model frame sharply.

23. 专业生产汽车制动钳、制动总分泵、离合器总分泵、橡胶减震件、等速万向节、总分泵修理包。

We are specialized in producing brake Caliper, brake pump, clutch pump, rubber absorber, constant velocity universal joint. etc.

24. 公司主营汽车橡胶零部件,橡胶制品含底盘减震器类,缓冲块,密封件,车身附件类,线束护套,点火线圈及其他橡胶类产品。

Our main products are rubber auto parts, such as shock absorber for chassis, bumper block, sealing, accessory body parts, wire harness, ignition coil and others rubber parts.

25. 结果表明,铅橡胶复合阻尼器具有很好的减震效果,具有广阔的应用前景。

The results show that the MLRD is an effective seismic control device with simple composition remarkable vibration-suppressing effect and economic benefit and its application prospect ap...

26. 结果表明,铅橡胶复合阻尼器具有很好的减震效果,具有广阔的应用前景。

The results show that the MLRD is an effective seismic control device with simple composition remarkable vibration-suppressing effect and economic benefit and its application prospect appears...

27. 标准化的实现可加速铅销橡胶减震支座投入工程实践的速度。

The realization of the LRB standard will accelerate the speed of being put into the construction of LRB.

28. 哈金森工业橡胶制品(苏州)有限公司主要分为6个部门:公共部,工业橡胶制品部,密封件部、传送带部、汽车减震件部和国际采购部。

HUTCHINSON SUZHOU is developing 6 Business Units: Common Department, Industry, Precision Sealing, Transmission Belts, Antivibration Pads and Asia Purchasing Office.

29. 哈金森工业橡胶制品(苏州)有限公司主要分为6个部门:公共部,工业橡胶制品部,密封件部、传送带部、汽车减震件部和国际采购部。

HUTCHINSON SUZHOU is developing 6 Business Units: Common Department, Industry, Precision Sealing, Transmission Belts, Antivibration Pads and Asia Purchasing Office.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!