聚合树脂用英语怎么说,聚合树脂的英文翻译


词语导航

基本信息

词语:聚合树脂

繁体:聚合樹脂

拼音:jù hé shù zhī

英语翻译

【化】 polymerized resin

分词翻译

聚合的英语翻译:

aggregation; converge; group; polymerization
【化】 polymerization
【医】 polymerism; polymerization; polymerize

树脂的英语翻译:

colophony; pitch; resin; rosin
【化】 resin
【医】 peucine; pitch; resin; resina

翻译例句

1. 研究了具有超耐久性的有机硅丙烯酸聚合树脂涂料特殊的分子结构。

The paint composed with special molecular structure of polyorgano - silicoacrylate resin, which possesses superageing resistant property, has been studied in this article.

2. 白色涂料聚合树脂,与K- 92固化剂组合,用于无溶剂室温固化抗化学腐蚀内衬。

Formulated white pigmented epoxy resin used in combination with hardener K-92 for solvent fee, room temperature curing chemical resistant linings.

3. 聚氯乙烯糊用掺混树脂是一种颗粒外观球形化、表观密度较高、吸油率低的悬浮聚合树脂。

The PVC paste blending resin is a kind of suspension polymerized resin with spheric particle morphology, high apparent density and low oil absorption.wWw.WeNTiyI.CoM

4. 塑料是用来定义由碳原子和其他元素以共用电子对的方式结合而成的聚合树脂连同有机物或者无机物类。

The term plastic is used to define human-made polymer resins containing carbon atoms covalently bonded with other elements, along with organic or inorganic substances.

5. 聚乙烯一种聚合的乙烯树脂,尤用于容器、厨房器具和各类管中,或以卷和片的形式供包装使用。

A polymerized ethylene resin used especially for containers kitchenware and tubing or in the form of films and sheets for packaging.

6. 综述了裂解C5石油树脂的聚合改性技术进展。

The progress of polymeric modification technologies for cracking C5 petroleum resin were reviewed.

7. 树脂乳胶膜的性能不仅与涂料的配方和其中聚合物的分子链结构有关,而且与聚合物的成膜过程密切相关。

The performance of the resin latex film was not only dependent on its formulation and the molecular chain structure of the polymer inside, but also the film formation process of the polymer.

8. 采用原位聚合法,分别使用脲醛树脂和蜜胺树脂两种囊壁材料对生物农药-阿维菌素进行了微胶囊包覆。

The abamectin microcapsules were prepared by in-situ polymerization process in this work, with melamine-formaldehyde resin and urea-formaldehyde resin as wall materials respectively.

9. 硅丙烯酸树脂是由硅树脂和丙烯酸单体反应而得到的产品,或是硅树脂和丙烯酸类聚合物的共混物。

Silicone acrylic resins can be either the reaction product of a silicone intermediate with acrylic monomers, or a cold blend of silicone resin and acrylic polymers.

10. 一类固体或半固体的天然的或合成的有机材料,一般为无清晰熔点的高分子量材料,多数树脂为聚合物。

Any type of solid or semi solid organic material of natural or synthetic origin, generally of high molecular weight with no defined melting point. Most resins are polymers.

11. 它不会抑制丙烯酸树脂和其它复合修复材料的聚合。

It will not inhibit the polymerization of acrylic and composite restorations.

12. 在化学工业中,聚合用于生产合成树脂和弹性体。

In chemical industry, polymerization is used to produce synthetic resins and elastomers.

13. 结果表明聚合方法对树脂形态、粒径、分散系数和聚集态结构均有一定程度的影响。

The results show that the morphology, the state of aggregation and the particle diameters of the resin are Connected closely with the method of polymerization.

14. 目的:观察快速和传统方法聚合热凝基托树脂后其力学性能的变化。

OBJECTIVE: To observe the effects on the mechanical properties of denture base resin polymerized by different methods.

15. 聚乙烯一种聚合的乙烯树脂,尤用于容器、厨房器具和各类管中,或以卷和。

A polymerized ethylene resin, used especially for containers, kitchenware, and tubing, or in the form of films and sheets for packaging.

16. 试验表明,采用复合催化法很容易制备聚合速度快且软化点适宜的壳法用热塑性酚醛树脂。

The results showed that a kind of fast curing novolac for shell process whose softing point is reasonable was easily prepared by compound catalysis.

17. 试验表明,采用复合催化法很容易制备聚合速度快且软化点适宜的壳法用热塑性酚醛树脂。

The results showed that a kind of fast curing novolac for shell process whose softing point is reasonable was easily prepared by compound catalysis .

18. 结论:不同材料的光敏树脂其聚合后的显微硬度存在差异。

Conclusion There was a significance difference on micro-hardness of light-cured composite resins.

19. 本实验采用环氧树脂、有机仲胺、聚酰胺和封闭异氰酸酯为主要原料,合成了固体分在70%的阳离子型环氧聚合物树脂;

An epoxy resin, an organic secondary amine, a polyamide and a blocked isocyanate are selected as main materials to synthesize polymer resin with solid content of 70%.

20. 测试和讨论了几种染料对色粉荷电性能的影响,并且根据FTIR测试结果分析了染料与聚合物树脂之间的相互作用情况。

The effects of dyes against the charging property were determined and discussed. The interaction between the dye and polymer resin was elucidated from the results of FTIR.

21. 目的研制新型液压自控牙用树脂聚合器。

Objective To develop a new dental resin hydraulic pressure cooker.

22. 复合树脂聚合后的转化程度可直接影响材料的生物、化学和物理机械性能。

The conversion degree of composite resins after curing directly affects their biological, chemical, physical and mechanical performances.

23. 涂料中常用的氟聚合物树脂有三种。

Three fluoropolymer resins are commonly used in coatings.

24. 作者介绍了近年来医用牙科复合树脂的组成、聚合方式的改进以及由此引起的物理、机械性能的改善。

This article reviewed the progresses in the composition and curing methods of medical composite resin, and the improvements in physical and mechanical properties.

25. 厂商会使用不同类型的聚合物,包括有机硅、丙烯酸树脂和凝胶。

Manufacturers use various types of polymers, including silicones, acrylics and hydrogels.

26. 厂商会使用不同类型的聚合物,包括有机硅、丙烯酸树脂和凝胶。

Manufacturers use various types of polymers, including silicones, acrylics and hydrogels.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!