膜板用英语怎么说，膜板的英文翻译

词语导航

基本信息

词语：膜板

繁体：膜板

拼音：mó bǎn

英语翻译

【医】 laminae membranacea

分词翻译

膜的英语翻译：

film; membrane; theca; velamen; velum
【化】 membrane
【医】 coat; envelope; film; lemma; membranae membranae; membranae membrane
panniculus; theca; thecae; tunic; tunica; velamen; velamenta
velamentum

板的英语翻译：

bat; board; plank
【计】 board
【医】 assula; bar; board; disc; disci; discus; disk; lamella; lamellae
lamina; laminae; plasue; plate; table; tabula; tile

翻译例句

1. 增膜板是管式蒸发空冷器中的新型强化传热元件。

Film sheet is a new type of element to enhance heat transfer in tubular evaporative air cooler.

2. 本发明提供一种保护掩膜板的方法，所述掩膜板包括：衬底；

The invention provides a method for protecting a mask.

3. 掩膜板上图形的像被投影到许多厘米以外的涂有抗蚀剂的片子上。

An image of the patterns on the mask is projected onto the resist-coated wafer , which is many centimeters away.

4. 内外部的加强筯，折流板，膜板，三角板等都应该倒角以方便锌水流动。

The internal and external stifferers, baffles, diaphrams, gussets etc. should have the corners cropped to aid the flow of molten zinc.

5. 本发明提供的方法可以充分保护掩膜板，提高掩膜板的质量和使用寿命。

The method can sufficiently protect the mask so as to improve the quality of the mask and prolong the service life of the mask.

6. 采用此公式和探针的原位参数对掩膜板的AF M线宽测量结果进行了修正。

The amendment expressions and the effective parameters have been utilized to amend the result of the AFM linewidth measurement on a microelectronic mask.

7. 根据传统相位掩膜板的设计原理，从两个方面对原有的相位掩膜板表达式进行扩展。

The original expression for phase mask plate can be extended according to the design principle of traditional phase mask plate.

8. 本机适用于装饰板、胶合板、细木工板，建筑模板覆膜板，地板，同向板厂预压工序；

The machine is used for Pre-pressing process of making plywood, blockboard and decorative board.

9. 注料管一端与整流阀上的输出管相互衔接，其上适当处设有枢接座，导膜板可枢接于枢接座上；

The appropriate point on a frame is provided with a film level division filling device which comprises a feed pouring tube, a film guide plate, a location seat and a side baffle.

10. 本论文在不使用膜板的条件下，在不同阳极片上采用一步法电化学聚合制备导电聚苯胺的纳米结构。

This dissertation presents a simple method (free-template) that provides conducting polyaniline nanostructures on different anodes via one-step electropolymerization.

11. 运转原理：膜板阀是一种手轮型阀门，它采用两个由非穿孔横膈膜隔开的阀杆。这些横膈膜防止了沿着阀杆的泄漏。

Operating Principle: The diaphragm valve is a handwheel-operated valve, utilizing a two-piece stem separated by non perforated diaphragms. These diaphragms prevent leakage along the valve stem .

12. EUV掩膜板被自动送入和送出双盒容器(Dualpod)中；其中内层盒可以储存在InSync系统的环境下。

EUV masks are automatically transferred into and out of the dual pod; the inner pod can be stored inside the InSync environment.WwW.WeNtIYI.coM

13. 在整个装置内使用的所有管道(采用环缝自动导轨焊接连接)、卡箍连接、膜板阀、和卫生泵都采用AISI 316l制造。

All piping (connected with orbital welding), clamp connections, diaphragm valves, sanitary pumps used in the whole plant is in AISI 316l.

14. 因此目前电子束光刻设备主要的用途是用于刻制掩膜板，许多人甚至认为电子束光刻技术的产出量永远也无法满足芯片量产的需求。

E-beam tools are used in photomask writing, but many believe the technology will never be fast enough for high-volume semiconductor lithography.

15. 左图是一套Applied TetraIII高级掩膜蚀刻系统，如果掩膜板制造商要开发和生产45纳米的掩膜，就必须得使用这套设备。

On the left is an Applied Tetra III advanced reticle-etch system. This system is used by virtually every maskmaker in the world for the development and production of 45-nanometer masks.

16. 本文提出了一种基于预测搜索的优化算法，利用该方法对掩膜板进行了优化设计，测试结果显示，其减少的掩膜板数量超过了传统方法的20%。

In this paper, a look-ahead search algorithm is proposed to optimize the design of masks. Applied to test data, the algorithm reduces more than 20% masks compared to the traditional method.

17. 哈德斯蒂膜层是离网状板最近。

Hardesty"s membrane is closest to the reticular lamina.

18. 如果光线被玻璃或者半导体表面反射的话，贴膜会改变其中大部分光线的方向使其重新射回太阳能板。

If light does reflect off either the glass or semiconductor surfaces, the film redirects much of it back into the solar panel.

19. 现在用于太阳能板的材料已经经过数十年的检验，而尽管威斯声称其公司的贴膜可以使用20年，但是其耐用性并没有被检测过。

The materials used in solar panels today have been tested over decades, and although Weiss says his company"s films will last for 20 years, their durability hasn"t been verified.

20. 薄薄的木质板附着在这层透明膜上，便是圆筒的间隔层。

Thin wooden slats are attached to the membrane to form the running surface of the roll.

21. 陶瓷色料组成和运用该色料的玻璃板上形成彩色陶瓷膜的方法。

Ceramic color composition and method of forming ceramic color film on glass plate using same.

22. 在拿到P C板的时，首要需要看产品的包装，看产品的保护膜贴的是不是无缺。

When get the PC board, first need to see the product packaging, see whether the protective film of product.

23. 本文介绍了对由杆、膜、梁、板壳单元组成的工程结构可进行实际设计的程序系统DDDU。

The program system DDDU for actual design of engineering structures composed of bar, diaphragm, beam, shell, etc. is introduced.

24. 通过膜应力和弯曲应力分布的特点，验证了板的屈曲过程的非线性特性。

The characteristic distributed for the membrane stress and crooked stress, has proved the bucking course of the panel is non-linear.

25. 所以在设计的时候可以考虑不同的软膜搭配，在综合考虑一下用户最终的需求，打造出不同凡响的绚丽的天花板。

We can consider different soft collocation in the design, considering the user end demand, create a beautiful ceiling be not of the common sort.

26. 首先拆下门内板，将防水膜小心地分离，这样可以接触到门把手的背面。

First remove the door panel and carefully peel back the waterproofing sheet to gain access to the back of the door handle .

27. 结果术前高频超声提示正确率为81。 6% （31 /38），其中包括半月板损伤18例、关节内游离体7例及滑膜病变6例。

Results The diagnostic accuracy of high frequency ultrasound was 81.6% (31/38), including 18 cases of meniscal tear, 7 cases of loose body and 6 cases of synovial lesions.

28. 自粘的塑料板、片、膜、箔、带、扁条及其他扁平形状材料，不论是否成卷。

Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls.

29. 其他塑料板、片、膜、箔、扁条。

Other plates, sheets, film, foil and strip, of plastics.

30. 其他塑料板、片、膜、箔、扁条。

Other plates, sheets, film, foil and strip, of plastics.