
词语导航
基本信息
词语:端面加工
繁体:端面加工
拼音:duān miàn jiā gōng
英语翻译
【化】 facing(operation)
分词翻译
端的英语翻译:
carry; end; fringe; point; proper; upright【计】 end
【医】 extremitas; extremity; telo-; terminal; terminatio; termination; tip
面的英语翻译:
face; surface; cover; directly; range; scale; side【医】 face; facies; facio-; prosopo-; surface
加工的英语翻译:
machining; process【化】 processing
【医】 elaborate; elaboration
【经】 extra work; process; processing; transform
翻译例句
1. 为了改善光纤激光器的输出光束特性,将光纤端面加工处理成近似凸球面。
In order to improve the beam properties of fiber lasers, the fiber-end surface is processed similar to a convex spherical surface.
2. 在加工端面、圆弧、圆锥以及蹊径直径相差较大的零件时,沿X轴方向进给时,固然进给速度不变,但切削线速度却不断地变化,导致加工表面质量变化。
In the end, arc, processing and ground is large diameter conical parts, along the X axis into to, is the same, but the linear cutting speed is constantly changing, the cutting surface quality changes.
3. 此工件有一精确机加工的大孔,因此通过一圆柱体采用该孔和工件端面定位。
The workpiece has an accurately machined bore, and is located from the bore and the end face, from a cylindrical post.
4. 对各种加工方法进行比较可知,在机械密封端面上加工微孔,激光表面处理技术是惟一有效的加工方法。
Compared with any other processing methods, laser technology is a unique way to produce micro-pores on the seal face.
5. 研究表明在部分密封端面上加工微孔可有效增大端面静压。
The parametric study demonstrates that substantial hydrostatic pressure can be produced on the seal face with partial micro-pores.
6. 在刀体的钢制端面上精确加工的高精度刀座可确保刀片的精确定位。
Steel in the knife body-side surface of the high-precision machining precision knife block to ensure that accurate positioning of the blade.
7. 用于铝型材端面的加工,以适应不同截面型材的配合。
Used for aluminum profile end processing, and suitable for various profiles.
8. 只需用一把刀具、二把刀杆就可同时进行工件的内孔外圆和端面的精剃加工。
The razor processing of the inner hole outer circle and the end face of the work piece can be carried out simultaneously only requiring a cutting tool and two arbors.
9. 在最终热处理后翼缘法兰的垫片的端面应进行加工。
The gasket faces of girth flanges shall be machined after final heat treatment.wwW.wEntIYi.Com
10. 本文的研究结果表明,双端面磨削可以在很短的加工时间内获得极高的表面光洁度、高的精度和高的磨除率。
Preliminary results presented in this report showed that double side grinding produces very good surface finish, a high precision, and high material, removal rates, in short processing.
11. 其主要用在生产线上加工汽车的气缸盖的两端面。
Its use primarily in the production on-line process the both ends of the automotive cylinder cover.
12. 本系列机床是万能双柱立式车床,可用作粗精车工件的外圆、内孔、端面及内外锥面等加工。
This series are universal type VTL of double column, used for inside and outside conical, end, cylindrical and bore.
13. 通过改变滚轮的形状可实现工件外径、锥面、端面、R面等广泛加工。
Machining of workpiece"s outer diameter, tapered face, end face, R face, etc. Is available by changing the shape of roller.
14. 本文通过对双端面磨削的加工机理进行分析,指出不同的加工方法对产品质量的影响是不同的;
By analyzing processing mechanism of double-width grinding, it"s pointed in this article that different processing method will leave different effect to the quality of products.
15. 本系列是万能型立式车床,可用于内外圆柱面、圆锥面、端面、切槽等粗、精加工。
This series are universal type VTL, and we can use for inside and outside cylindrical, conical, end and notch of roughing and fine machining.
16. 铝型材端面铣床是用来加工铝合金门窗型材端面的专用设备。
The machine is used for face processing of alu-alloy door-window profiles, suitable for process of different sectis and faces.
17. 针对大型立式车床的加工环境,本文提出了一种大端面工件在线测量方案。
In this paper the authors propose a method of online measurement of large workpiece for the machining environment of large vertical lathe.
18. 端面拔动顶尖是我厂设计,开发和制造的机床附件,主要用于加工轴尖零件。
Constant face dirver is a dind of new type machine tool accessory designed and produced by our factory.
19. 加工过程中,通过数据采集卡检测电极间的加工电压变化或者回路中的电流变化,自适应控制电极间的端面间隙。
The gap between the electrodes can be self-adaptive controlled by detecting the voltage or the current changes during the machining duration.
20. 通过光学研磨、端面切割等手段对光纤端面进行加工,获得平整光洁的光纤端面。
By means of optical grinding and cutting optical fiber end face, it can access clean fiber end face.
21. SHPB系统端面平行度加工要求分析。
Analysis of parallelism requirement for bar ends in SHPB system.
22. 研究了数控与普通铣床多次走刀端面粗铣加工中铣削用量的计算机辅助优化。
This paper addresses the optimization strategy for the selection of economic cutting conditions in multipass face rough milling operations on CNC and conventional machine tools.
23. 它是用淀粉加工而成的条状物,其特征是粉丝长度为2-10毫米,两端面为规则或不规则的圆形或长方形。
The utility model is a stick made of starch. The utility model is characterized in that: the length of the vermicelli is 2-10mm. Two end faces are regularly or irregularly circular or rectangular.
24. 砍伐后的新鲜原木当经过端面涂刷防腐处理后,如果在一个月内不能及时加工,就必须进行第二次端面处理。
Thusfresh logs treated with preservatives at both cut ends must be re-treated if they can not be processed within one month, i. e. , a second treatment should be done one month after the first.
25. 圆柱齿轮减速器箱盖的机械加工工艺过程设计及铣削观察孔端面的专用夹具设计;
Cylindrical gears reduction gear box lid"s machine-finishing process engineering and milling port hole end surface"s unit clamp design;
26. 端面刀具用在端面作业中加工平板侧面或端部表面,也有加工左右侧表面之分。
Facing tools. Facing tools are employed in facing operations for machining plane side or end surfaces. There are tools for machining left-hand-side surfaces and tools for right-hand-side surfaces.
27. 端面刀具用在端面作业中加工平板侧面或端部表面,也有加工左右侧表面之分。
Facing tools. Facing tools are employed in facing operations for machining plane side or end surfaces. There are tools for machining left-hand-side surfaces and tools for right-hand-side surfaces.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
