填充金属用英语怎么说,填充金属的英文翻译


词语导航

基本信息

词语:填充金属

繁体:填充金屬

拼音:tián chōng jīn shǔ

英语翻译

【化】 filler metalwWW.WEnTIYi.CoM

相关词条

1.addedmetal  

分词翻译

填充的英语翻译:

fill; fill in; fill in the blanks
【计】 fill; pad-out; padding
【化】 filling; loading; packing
【经】 padding

金属的英语翻译:

metal
【化】 metal
【医】 metal
【经】 metal

翻译例句

1. 激光束与填充金属之间的相互作用。

Interactions of laser beam with filler metal.

2. 这两种方法,包装必须完全填充金属筐。

Both methods, the packing must be completely filled gabion.

3. 低成本的焊道,与其他焊接过程相比,填充金属的数量相对比较少。

The quantity of filler metal being often much lower than with other welding processes.

4. 使用按其它标准生产的填充金属,必须事先提出书面申请,并获得赛科公司的批准。

Requests to use filler metals manufactured to other standards must be in writing and approved by SECCO prior to use.

5. 需要适当的程间温度和正确选择填充金属材料来防止冷热裂缝,产生适当的蠕变阻力和韧性。

The proper interpass temperature is required to prevent cold and hot cracking as well as the proper selection of welding filler material, to produce the proper creep resistance and toughness.

6. 采用此方法,产品的焊接变形小,填充金属少,焊缝质量高,取得了良好的焊接质量和经济效益。

By this way, the welding deformation and the filler metal can be decreased to minimum. However, the weld quality is high, the good economic benefit is achieved at the same time.

7. 材料并列:用灰泥填充金属,两者都发生改变。空间上和材料上,这两种已知形式的结合创造了新的事物。

Material juxtaposition: Plaster fills metal, and the two are changed. Both spatially and materially, this union creates something new from two known types.

8. 球体之间的空隙用金属填充。

The space between the spheres gets filled with metal.

9. 新的巴士座位设计成为更高、更宽、更厚的,所有金属表面将会有填充物覆盖,所有这些设计都是为了在碰撞中吸收能量。

New bus seats are higher, wider and thicker, and all metal surfaces are covered with padding-all of which absorb energy in a crash.

10. 银色的汞合金在牙科中被用于填充牙齿患病后残留的腔洞,合金包括液态的汞和粉末状的银、锡、铜、锌以及其他金属。

Dental amalgams, the silver-colored material used to fill teeth after removal of a cavity, include liquid mercury and a powder that contains silver, tin, copper, zinc, and other metals.

11. 类似的存储也可在厨房内发现,这个额外的空间被酒吧的金属器皿填充了。

Similar to storage found in kitchen, this pullout is fitted with metal bars for extra storage.

12. 构件由钢筋混凝土制成,同时顶楼屋顶由填充了隔热和隔音材料的金属板制成。

The structural elements are made of reinforced concrete while the roof on the top floor is made from metal sheets filled with heat and acoustic insulation.

13. 办公桌面采用了世界顶尖的蜂窝金属填充技术、使产品永不变型、绝对的减轻了产品的重量。

Office desk with a metal filling the world"s leading cellular technology, the product will never change, the absolute ease the weight of the product.

14. 研究了填充聚四氟乙烯向金属匹配面的转移模型。

The transfer model of the filled PTFE toward the metal counterface was also studied.

15. 利用广角X射线衍射分析仪对低熔点金属及合金填充聚合物材料体系的结晶行为进行了研究。

The crystallization property of polymer matrix filled with low melting metals and alloy was studied by wide-angle X-ray diffraction.

16. 结果表明:在纯碳化硅材料中分别加入硅、铝粉之后,由于金属的延展性,在成型过程中有利的填充了碳化硅颗粒间的空隙,使得干坯更加致密。

The results show that: the specimens with metal silicon or aluminum powder become denser because the plastic metal powder contributes to filling the space.

17. 最普遍的是板框式过滤机,有可填充的、金属隔片的和凹显空间滤饼的。

The most common, the plate-and-frame press, contains caulked , metal septa and a recessed cake space.

18. 本文系统介绍了金属填充碳纳米管的化学气相沉积制备与电子显微学研究。

Carbon nanotubes filled with metal were synthesized through chemical vapor deposition method, and the structure were studied by electron microscopy.

19. 研究了合金元素、加工温度、金属含量、第三组分对低熔点金属填充聚合物材料断口形貌的影响。

It studied the influences of alloy elements, processing temperature, contents of metal and additives on the fracture section morphology of low-melting alloy filled polymer.

20. 运用生死单元技术模拟焊缝金属的填充过程。

The life and death technology was applied to simulate the weld metal filling process.

21. 工厂生产毛绒填充玩具或者车缝产品时,是否有金属探测仪和断针/锋利工具的管控程序? ?

Toys and Children"s Hardgoods productPlush/Sewn product - does factory have metal detection AND needlepolicy?

22. 通过试验方法研究了泡沫铝填充薄壁金属管塑性变形缓冲器在准静态作用下的吸能特性。

Energy absorption characteristic of a plastic deformation energy absorber filled with aluminum foam in a thin-wall metal tube under quasi-static state was studied by test method.

23. 本文研究了碱土金属盐填充聚丙烯复合材料增韧机理及碱土金属盐含量对填充体系性能的影响。

This article deals with the toughening mechanism of PP composite filled with alkaline earth salt and effects of amount of alkaline earth salt used on the properties of the composite.

24. 固体推进剂是一种颗粒填充高能聚合物,其破坏时所表现出的一些行为和金属的破坏相比,有明显不同之处。

The solid propellant is a high energy polymer filled with particles, which behavior of failure is evident different from metal.

25. 固体推进剂是一种颗粒填充高能聚合物,其破坏时所表现出的一些行为和金属的破坏相比,有明显不同之处。

The solid propellant is a high energy polymer filled with particles, which behavior of failure is evident different from metal.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!