材料强度用英语怎么说,材料强度的英文翻译


词语导航

基本信息

词语:材料强度

繁体:材料強度

拼音:cái liào qiáng dù

英语翻译

【机】 strength of materials

分词翻译

材料的英语翻译:

data; datum; makings; material; stuff
【医】 data; datum; material; stock
【经】 material; materials; spoilage

强度的英语翻译:

intension; intensity; strength
【计】 intensity
【化】 strength
【医】 intensity; strength

翻译例句

1. 豆茎和旋耕机目前受到可用材料强度的限制。

Beanstalks and rotovators are currently limited by the strengths of available materials.

2. 不同的破坏模式对材料强度影响很大。

The failure mode also greatly influences the mechanical properties of material.

3. 锁的安全防破坏性能取决于锁体材料强度。

Anti - damaged properties of locks depends on the strength of the material.

4. 本文讨论了复合材料强度的统计分析方法。

In this paper a statistical analysis method for strength of composite materials is treated.

5. 耐磨性是材料强度(硬度)与塑性的综合体现。

The wear resistant is comprehensive embodiment of strength (hardness) and plasticity of materials.

6. 为使桥梁不致在使用中断裂,建造桥梁的材料强度必须非常高。

The material for building the bridge must be very strong so that it may not break in use.

7. 测量各种建筑材料强度值的常用设备是液压式压力试验机。

The conventional equipment for measuring the strength of various construction materials is the hydraulic material testing machine.

8. 本文主要研究了蒸养粉煤灰陶粒墙体材料强度及收缩性能。

This thesis mainly investigates the strength and the shrinkage Properties of steam-cured fly ash aerated wall material.

9. 结果表明,少量磺酸盐离子的引入有利于材料强度的提高。

The results show that the introduction of sulfonate ion benefits the tensile strength increasing of PSSS ionomer.

10. 此时,挤压粘接碳纤维层,冷却聚合胶,之后再进行材料强度和韧性的测试。

The layers were then pressed together and the glue was allowed to cool, before the material was tested for strength and toughness.

11. 由这些参数生成了一个破断评估图来量化裂纹对材料强度的影响程度。

Using these parameters, a failure assessment diagram was generated to quantify the effects of the presence of cracks on material strength.

12. 由于表面热疲劳裂纹的产生,使得材料强度性能损伤大于断裂韧性损伤。

The strength loss is greaser than the fracture toughness loss, because ofthe surface cracks caused. by thermal fatigue.

13. 本文从材料强度的观点,分析了石油矿场机械的服役条件和主要失效类型。

In view of the strength of materials, the operating condition and main failure mode of oil field equipment are analysed in this paper.

14. 前两种为脆性断裂方式,热解炭基体的断裂应变是这类材料强度的控制因素。

The former two types are brittle ones, and the fracture strain of pyrolytic carbon matrix is the controlling factor of the strength.

15. 与块体莫来石陶瓷相比,在保证材料强度降低较小的情况下断裂韧性提高了62%。wWw.WENtIYI.com

The fracture toughness of the composite was increased 62% with little decrease of flexure strength when compared with mullite monolithic ceramics.

16. 目的研制一种新型的钙云母增强陶瓷,探讨提高氟金云母类切削陶瓷材料强度的方法。

Objective To study the strengthening of fluorophlogopite based dental machinable ceramic through developing a new type of calcium mica based ceramic.

17. 由于沥青混凝土材料强度的温度依赖性,弯沉以至路面结构承载能力都随温度而变化。

Since asphaltic concrete materials are temperature dependent in nature, measured deflections and hence the structural capacity of pavement vary with temperature.

18. 同时根据材料强度理论和动态强化规律推导出材料微观结构参数与冲击速度之间的关系。

Meanwhile, the relationship between the material microscopic structure parameter and the impact speed has been concluded according to the material strength theory and the dynamic strengthened rule.

19. 本文叙述了勘查房屋现状、检测主要构件的材料强度、测量房屋变形及不均匀沉降的过程。

This paper stated the process of examining the strength of the main members, the distortion and the settlement.

20. 这说明材料强度提高并不是聚合物发生化学反应造成的,一般这种变化在加热状态下是可逆的。

This suggests that the self-stiffening is not the result of chemical changes in the polymer, which can usually be undone by heat.

21. 应力分析方法、材料强度理论、安全指标与设计准则是结构强度设计与计算理论的主要内容。

Stress analysis method, material strength theory, safety index and design criteria are main contents in strength design and computation of structures.

22. 介绍了选取该三项因子进行正交试验设计从而找出提高亚麻非织造复合材料强度的有效方案。

Doing orthogonal testing design by choosing three terms of factor and find out the effective method for improving linen nonwovens intensity.

23. 基于现有的研究资料,对不同应变率区的材料强度的应变率依赖性机理及其转换进行了探讨。

Based on available research results, the physical mechanism of strength-strain rate sensitivity in different strain rate regions and the transition between them are studied.

24. 给出了不同材料强度的无粘结预应力混凝土(upc)梁抗弯强度和结构性能的分析研究结果。

The results of analytical investigation on the flexural strength and structural behavior of unbonded prestressed concrete (UPC) beams with various material strengths were presented.

25. 对桩基的轴向承载力研究,有两种确定方法,按土体的支承能力确定或按桩身的材料强度确定。

The axial bearing weight research of pile foundation has two ways to confirm, according to soil"s bearing capability, or the material intensity of the pile body.

26. 从而也为今后从所编入光纤角度考虑来研究编织复合材料强度预估和失效判据奠定了实验基础。

All these results provide an experimental basis for further studies on the strength prediction and failure criterion"s setup by the means of braided optical fiber.

27. 基桩的稳定长度不仅用于基桩的纵向屈曲问题,而且也是桩身材料强度验算必不可少的参数之一。

The buckling equivalent length of a pile is not only used in the buckling of the pile but also one of the necessary parameter checking the material strength of the pile.

28. 采用有限元方法分析了颗粒增强铁基复合材料强度和应力与颗粒形状、尺寸以及体积分数的关系。

The finite element method is used to analyze the relationship between strength and stress of the particle reinforced iron matrix composites and the shapes, sizes and fraction volume of the particles.

29. 应变率增加,材料强度提高,屈强比增大,塑性略有降低,但流变阶段应变率强化系数基本不变。

Raising the testing strain rate, the strength and yield ratio increased the plasticity slightly decreased, but the strain rate hardening index kept constant.

30. 探讨了热处理温度、萃取条件、晶须含量、粉体粒径对偏磷酸钙产物形貌和复合材料强度的影响。

The factors influencing the morphology and strength of the samples such as heating temperature, extraction condition, crystal content and powder diameter were discussed.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!