椭圆孔用英语怎么说,椭圆孔的英文翻译


词语导航

基本信息

词语:椭圆孔

繁体:橢圓孔

拼音:tuǒ yuán kǒng

英语翻译

【化】 elliptical hole

相关词条

1.ellipticalaperture  

分词翻译

圆孔的英语翻译:

【医】 foramina rotundum

翻译例句

1. 研究了开椭圆孔有限板的应力集中问题。

The paper studies the stress concentration of finite plates containing multiple large holes.

2. 分析了椭圆孔口端点和裂纹端点处的变动态应力。

Stress analysis in variation states at crack tip and notch crown tip is presented.

3. 本文利用保角变换方法计算了近椭圆孔边位错象力。

The image force on the dislocation near an elliptical hole is calculated by conformal mapping technique.

4. 孔形:圆孔、长孔、三角孔、椭圆孔、浅拉伸鱼鳞孔等。

Hole shapes: Round holes, long holes, triangle holes, oval holes.

5. 文中给出了无限平板带椭圆孔又受集中力和力偶时的弹性分析。

This paper gives an elastic analysis for an infinite plate weakened by an elliptical hole and being applied by concentrated forces and force couples.

6. 椭圆孔提供了一个柔和的乘坐,从而降低了设备和操作人员的疲劳。

Elliptical apertures provide a softer ride which reduces equipment and operator fatigue.

7. 孔型:长孔、圆孔、三角孔、椭圆孔、浅拉伸鱼鳞孔、拉伸异型网等。

Hole shapes: long holes, round holes, triangle holes, lightly pull scale holes, other pull wire nettings, etc.

8. 在对张减机椭圆孔型传统设计方法和西德所提供的设计方法分析的基础上。

Based on the analysis of the conventional oval pass design of a stretch reducing mill and the design provided by W.

9. 采用正交函数算法,提出了一种新型椭圆孔光子晶体光纤的本地正交函数模型。

A novel model for light propagation in elliptical hole photonic crystal fibers (PCF) is developed with localized orthogonal function method.

10. 采用分区域解法,给出了中心有椭圆孔的椭圆形区域内位势流动问题的解析通解。

The general analytic solution for the potential flow in an elliptical area with a coaxial elliptical hole was found by combining similar flow substitution and flow area division.

11. 采用全矢量有限元法分析了椭圆孔椭圆芯光子晶体光纤的结构对模式双折射的影响。

The influences of the structures of elliptical core Photonic Crystal Fibers with elliptical pores on the modal birefringence are investigated by using the full-vectorial finite elements method.

12. 本文阐述了椭圆孔及圆球面成形原理,介绍了利用万能铣床加工椭圆孔及圆球的方法。

The forming principle of elliptical hole and the ball surface is illustrated in this paper, and it also introduces the processing method to elliptical hole and the ball surface with universal miller.

13. 椭圆孔提供了一个柔和的乘坐,从而降低了操作人员的疲劳和设备的磨损-最终提供更好的生产力。

Elliptical apertures provide a softer ride which reduces operator fatigue and equipment wear - ultimately delivering improved productivity.

14. 基于超格子构造法,采用全矢量模型研究具有中心缺陷孔的椭圆孔光子晶体光纤(EHPCF)的偏振特性。

Based on the supercell overlapping method the full vector model was adopted to model polarization properties of elliptical-hole photonic crystal fiber (EHPCF) with central defect hole.WWW.WENTiYI.cOM

15. Solidflex高清功能,提供前所未有的乘坐舒适性,从而减少设备的磨损和操作人员的疲劳的椭圆孔。

The Solidflex HD features elliptical apertures that deliver unprecedented ride comfort which results in reduced equipment wear and operator fatigue.

16. 口两侧各有一对钩,虫体布满似乳突状小棘,只有成虫前端和末端两侧可见散在的隆起的椭圆孔状感觉器,虫体末端腹面可见肛孔。

There was a pair of curved hamuli on both sides of the mouth, while small spines like mastoid process were covered with the shape of the body.

17. 在大圆钢轧制或大断面轧件延伸孔型系统中,双半径椭圆孔型与单半径椭圆孔型相比,具有轧件易咬入、变形较均匀、孔型磨损小等优点。

The double radius ellipse pass is better than the one of single radius ellipse in the big round bar or big section steel rolling.

18. 本文利用相似流动替换方法,解决了中心有圆孔的椭圆形区域内的位势流动问题;采用分区域解法,给出了中心有椭圆孔的椭圆形区域内位势流动问题的解析通解。

The problem of potential flows in an elliptical area with a circular central hole was solved by the substitution of similar flows in this paper.

19. 采用三维流函数法对棒材热连轧时的椭圆-圆孔型系统进行了力能参数的解析,其结果与实测结果符合很好。

Using three dimensional fluxional function, the rolling force and energy parameters of oval round pass sequences for hot continuous bar rolling were analyzed.

20. 在用水平二辊连轧机轧制中,椭圆轧件进入圆孔型翻转时易出现错辊、导卫装置损坏、轧件划伤等一系列问题。

A serials of problems of miss position of roll, easy damage of guide and guard, scuff mark of piece were common during oval piece entering round pass by 2-h horizontal mill.

21. 在用水平二辊连轧机轧制中,椭圆轧件进入圆孔型翻转时易出现错辊、导卫装置损坏、轧件划伤等一系列问题。

A serials of problems of miss position of roll, easy damage of guide and guard, scuff mark of piece were common during oval piece entering round pass by 2-h horizontal mill.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!