
词语导航
基本信息
词语:控制机
繁体:控制機
拼音:kòng zhì jī
英语翻译
【计】 controlling machine; cybertron
分词翻译
控制的英语翻译:
control; dominate; desist; grasp; hold; manage; master; predominate; reinrule
【计】 C; control; controls; dominance; gated; gating; governing
【医】 control; dirigation; encraty
【经】 check; command; control; controlling; cost control; dominantion
monitoring; regulate; rig
机的英语翻译:
chance; crucial point; engine; machine; occasion; organic; pivot; planeflexible
【医】 machine
翻译例句
1. 第二部分,利用控制机完成中心配置。
Second, use the control machine to do the central configuration.
2. 主控制机模块的设计与实现。
The design and accomplishment of Host control module.
3. 每个平台都必须有一个处理平台的总体配置的控制机。
Each platform must have one control machine that handles the overall configuration for the platform.
4. 完成配置后,控制机的功能和平台中的其他组件一样。
After configuration is complete, the control machine functions as simply another component in the platform.
5. 卸料门开度可调,可控制机盆内物料的数量。
Discharging opening can be regulated which can heighten control amount of materials in the basin of the machine.
6. 介绍了新一代APCI工业控制机的设计特点。
The major design features of APCI industrial computer are presented.
7. 压力控制系统通过控制机外气流来提供客舱压力差。
The pressure control systems provide cabin differential pressure by controlling the outflow of air from the faselage.
8. 现在您需要选择一个机器作为控制机,并在这台机器上完成配置。
Now you need to select a machine as the control machine and do the configuration on that machine.
9. 该平台配置工具既可以为平台配置组件机,也可以为平台配置控制机。
The platform configuration tool configures both the component machines and the control machine for a platform.
10. 智能交通信号控制机是用来控制交通路口信号灯转换的设备。
Intelligent traffic controlling machine is an equipment used in the street intersection to control vehicle flows.
11. 这事可能仍然让你感觉有点虚幻,但是心灵控制机的时代来临了。
So far researchers have mapped out the brain patterns for these sounds:It may still sound futuristic, but the era of mind-controlled machines is here.
12. 采用STD总线工业控制机对松脂间歇蒸馏系统实行自动控制。
This paper deals with the automatic control system for batch distillation of oleoresin by STD bus microcomputer.
13. 道路交通信号控制机是城市道路交通信号控制系统中的重要设备。
Road traffic signal controller is an important device in urban traffic signal control system.
14. 而良好的接地则是使工业控制机系统稳定运行、消除干扰的重要措施。
And good grounding is important means to stabilize work of industrial control computer system and to obviate the disturbances.
15. 在选择配置部件页面上,选择将此机器配置为控制机(参见图1),然后单击下一步。
On the select Configuration Role page, select Configure this machine as control machine (see figure 1), and click Next.
16. 介绍了侧滑试验台的构造机理,提出了侧滑试验台工位控制机的标定方法。
This paper introduces the structure mechanism of side-slip checking stand and proposes the calibration method of the side-slip checking stand station controller.
17. 系统采用直接控制级(前沿机)和过程管理级(中心控制机)二级控制结构。
Two control constructions are adopted for in the system, the directly controlling class (front machine) and the process managing class (center control machine).
18. 该方法可根据过程控制机采集的现场工作数据,实时地计算出蒸发器的传热系数。
By using this method and the operation data collected by the process control computer, the heat transfer coefficients will be achieved in real time.
19. 研究了应用工业控制机对空调压缩机排气管的高频钎焊过程进行控制检测的问题。
Using an industry control computer, the detection and control for HF brazing compressor air drains is discussed in the paper.
20. 控制机(Controlmachine):协调平台配置的机器称之为控制机。
Control machine: the machine that coordinates the configuration of the platform is called a control machine.
21. 组件机(Componentmachine):控制机以外的机器称之为组件机。
Component machine: the machine that is not the control machine is called a component machine.
22. 用工业控制机实现了智能变结构p SS的控制算法,并对单机无穷大系统进行了实验研究。
Controlling algorithm of intelligence variable structure PSS is implemented by industry control computer, the experiment for a single machine infinite bus system is done.
23. 文中提出了一种基于DSP的交通信号控制机的实现方法,同时给出了具体的硬件、软件设计。
A kind of implementation of traffic signal controller based on DSP is suggested in this paper, and the detailed design of hardware and software is also introduced.
24. 交通信号控制机(简称信号机),对减轻交警工作强度和维护交通安全畅通起着举足轻重的作用。
The traffic signal controller is important for reducing the work intensity of traffic policemen and for increasing the traffic security of roadway.
25. 本文提出用8098单片机作为工业控制机,使其丰富的软件与硬件资源在随动系统中得到利用。
This paper proposes using 8098 single chip computer as industrial control. The rich software and hardware resource of the single chip computer is used in servo—system.
26. 并对机床本体、CNC数控系统、工业控制机系统和加工制冷四大部分的功能及工作原理作了介绍。
It is also introduced the four new parts: the machine body, the CNC system, the industrial control system and heating cooling system, as well as its functions and working principle are described.
27. 控制机完成对11台热处理炉的温度控制,其温度控制采用一种智能开关控制算法。实用效果较好。
This system can complete temperature control for 11 electric furnace With an intelligent switch algorithm and good result is obtained.
28. 该系统为两级控制,PC机作为上位机进行信息管理和控制规划,PLC作为控制机实现控制任务。wWw.WenTiyI.COm
The system is devided into two layers, a PC is used in up layer for supervising of message and control, a PLC is used in bottom layer for controlling task.
29. 该系统为两级控制,PC机作为上位机进行信息管理和控制规划,PLC作为控制机实现控制任务。
The system is devided into two layers, a PC is used in up layer for supervising of message and control, a PLC is used in bottom layer for controlling task.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
