轴前的用英语怎么说，轴前的的英文翻译

词语导航

基本信息

词语：轴前的

繁体：軸前的

拼音：zhóu qián de

英语翻译

【医】 preaxial

分词翻译

轴的英语翻译：

axes; axis; shaft; spindle
【医】 ax-; ax.; axes; axio-; axis; core

前的英语翻译：

former; forward; front; preceding; priority
【医】 a.; ante-; antero-; fore-; pro-; proso-; ventri-; ventro-

翻译例句

1. 不过，我们可能会设想，粒子沿所有轴的自旋是在测量前就确定了的，这正是一般我们在生活中所做的假设。

Still, one might imagine that the particle"s spin around any axis was set before anyone ever came along to prod it. That"s certainly what we ordinarily assume in life.

2. 这两种型号均采用了前反馈和健全的离轴增加抑制高增益超心形图案。

Both models feature super cardioid patterns for high gain before feedback and increased rejection of off axis sound.

3. 内啮合齿轮泵的结构和其他齿轮泵结构类似，主要由外转子、转子、泵轴、泵体、前盖、托架、密封装置、轴承等组成。

Internal gear pump structure and other gear pump structure similar to, mainly by the outer rotor and rotor, pump shaft, pump body, the front cover, bracket, sealing device, bearing, etc.

4. 你拿另一轴卷册来，写上犹大王约雅金所烧毁的前一轴卷册上的一切话。

Take thee again another volume: and write in it all the former words that were in the first volume which Joakim the king of Juda hath burnt.

5. 启动前应除去减速机输入轴迷宫密封端面和输出传动法兰迷宫密封外圆表面，以及呼吸器上的防锈包装及胶带。

Prior to startup, get rid of tape from labyrinth seal end of input shaft, labyrinth seal outer surface of output drive flange and respirator.

6. 第二个阶段则是球棒沿垂直轴朝击球区快速转动，该活动起始于球与棒相撞的前120毫秒。

The second phase, starting 120 milliseconds before impact, was the rapid rotation of the bat about a vertical axis into the hitting area.

7. 检查前万向节轴上的回旋式风箱是否损坏。

Check the convoluted air bellows on the front cardan shaft for damage.

8. 结果表明，前震的一组节面比较集中且与主震断层面大体一致，其主压应力轴也表现出相对的集中。

The results show that the group of nodal planes of pre shocks puts together comparably and identical with the fault of main shock, so do their P axes.

9. 前两种排沙方式已经广泛应用于工程实践中，平轴螺旋管流排沙是近年提出的一种节能、高效的输沙方式，目前还处于试验研究阶段。

The spiral flow in the horizontal pipe can generate the spiral flow to transport sediment according to the way of equipping the guide blade in the middle of the pipe.

10. 由于套圈会和机器的圆轴保持一致，所以这种情况对于检测安装好的轴承并无影响，但当在安装前测量就应被注意到。

Since the rings adapt themselves to the round form of the matching parts, this circumstance has no effect on the installed bearing, but it is noticed when measuring the bearing before installation.

11. 针对传统两轴稳定雷达导引头存在的不足，提出了前馈补偿解耦方案。

The feedforward compensated decoupling scheme was proposed to solve the deficiency of traditional two-axis stabilized radar seeker.

12. 采用实验方法对某舰尾轴架进行动刚度测量，得到了前尾轴架和后尾轴架的横向动刚度曲线。

In the paper, the transverse dynamic stiffness curves of front shaft bracket and back shaft bracket of a ship were obtained by means of experiments.

13. 当挥击依著固定轴旋转时，更大的棒的速度产生。当躯干前移时，挥击的组成检慢下来。

Greater bat speed is created when the swing is rotates around a stationary spine. When torso move forward, swing components slow down.

14. 震前主应力轴的旋转。

The axes of principal stress rotated before earthquake.

15. 方法通过对常规俯卧后前髌骨轴位和站立负重髌骨轴位的投照方法得出的影像及照片成功率加以对比。

Methods Compare the radiographic operation method, the image and the film success ratio of the original P-A Merchant view with those of the standing weight-bearing Merchant view.

16. 这种新的车辆结构使得它可以与短前悬长轴距，并优化轴负荷分配。

This new vehicle architecture makes it possible to have a long wheelbase with a short front overhang, and to optimise the axle load distribution.

17. 对该模型施加适当的约束和载荷，通过预前共轭梯度法，计算得到了轴类零件在常见工况-弯曲和扭转载荷作用下的位移、应力、应变等力学特性。

Results of displacement, stress and strain of the shaft under the common loads of bend and torsion are obtained by Pre-condition conjugate gradient method.

18. 试验结果表明：在应力峰值前的长时间单轴压缩作用下，硬脆性大理岩的破坏表现出明显的时滞性；

The test results show that: the hard brittle marble obviously performs time-lagged destruction under long time of pre-peak stress uniaxial compression.

19. 来自海马下托复合体皮质投射神经元轴突终末，在丘脑前核与投射至海马下托皮质的神经元树突形成非对称性轴-树突触。

In anterior thalamic nucleus corticothalamic projection neuron terminals form asymmetric synaptic contacts with HRP-labelled thalamocortical projection neurons by axo-dendritic synapses.

20. HGP系列滚轴筛是利用多轴同向等速旋转推移物料前移，并同时进行筛分作业的一种机械设备。

Main propertiesSeries of HGP roller screen is a kind of equipment which has materiel move forward by using of multi-shaft rotating with same speed and direction.

21. 结果表明：1）DCCA排序的前4个轴分别与海拔、 坡位和坡度、 坡向和坡面显著相关；

The results suggest that: 1) the first 4 axes of DCCA are prominently associated with elevation, position and slope exposure, and mountain aspect respectively;wWw.weNTiYi.com

22. 较小的转弯半径，前刚性轴上较轻的重量。

MANEUVERABILITY. Short turning radius, less weight on the front axle.

23. 与主动后轮同一轮轴的从动后轮，其可呈空转状态，该轮轴并连接于底盘后端下方，而可前、后幌动移动；

The wheel shaft is connected at the lower side of the rear end of the car body, and can swing and move front and back.

24. 拨叉组合带动翻转板的端轴，使翻转板实现一前一后的翻转。

The dialing fork assembly drives the end shaft of the turnover plate for back and forth turnover.

25. 传动轴、螺旋弹簧、传动轴上的键槽、滑块、前限位和后限位等部分。

It includes driving shaft, helical spring, key way on the driving shaft, block, front stop unit, back stop unit, etc.

26. 结果表明：在直槽或螺旋槽、零前角或正前角等情况下，用本文设计的磨轮铲磨的滚刀，其基本蜗杆轴截形在从新到旧的整个使用过程中都是精确的。

The following conclusion is obtained. In the cases of straight gash, spiral gash, zero rake angle and positive rake angle, the hob worm profile from hob put into use to hob abandoned i…

27. 我们研制的MMK6026六轴五联动CNC工具磨床用于加工锥形球头立铣刀和其它复杂形状刀具的前刀面与后刀面。

Our product MMK6026 , which is CNC tool grinder with 6-axis and 5-coordinate controls, is used to machine the rake face and relief of conical ball end mills or other complex shaped tools.

28. 结果降温前，模型组大鼠肾上腺皮质轴激素水平和甲状腺轴激素的水平均低于相应的生理组大鼠（P或P

Results Before sudden drop of temperature, the levels of adrenal axis hormones and thyroid axis hormones were lower in the model group than those in the normal group(Por P

29. 结果降温前，模型组大鼠肾上腺皮质轴激素水平和甲状腺轴激素的水平均低于相应的生理组大鼠（P或P

Results Before sudden drop of temperature, the levels of adrenal axis hormones and thyroid axis hormones were lower in the model group than those in the normal group(Por P