
词语导航
基本信息
词语:外壳结构
繁体:外殼結構
拼音:wài ké jié gòu
英语翻译
【计】 shell mechanism
分词翻译
外壳的英语翻译:
case; crust; husk; shell
【计】 body case; DOS shell; outer casing; shell
【化】 case; encloser; enclosure; housing; outer casing; outer housing
结构的英语翻译:
frame; structure; composition; configuration; construction; fabric; mechanism
【计】 frame work
【医】 constitution; formatio; formation; installation; structure; tcxturewww.WeNtiyi.COM
翻译例句
1. 控制电压和外壳结构(NEMA,等等)。
Control voltage and enclosure designations (NEMA, etc.).
2. 但是国际原子能强调主要外壳结构仍然完好,压制着辐射释放。
But the International Atomic Energy Agency (IAEA) has stressed the primary containment of all the structures remains intact, holding down any radiation release.
3. 弯曲的水泥墙和地板向外拱起,使双曲型的外壳结构得以完整。
The curved concrete walls and floors arch up and outward, deriving their structural integrity from their shell-like double curvature.
4. 本发明中永磁电机转子外壳结构简单,制造工 艺简化,装配操作容易,制作成本低。
The rotor casing of the permanent-magnet motor has the advantages of simple structure, simplified manufacturing process, easy assembly and operation and low manufacture cost.
5. 如果反应堆的外壳结构不够坚固的话,那么燃料就有可能泄露到外面的环境,这将会对周围的地区产生毁灭性的结果。
If the containment structure around the reactor is not strong enough, the fuel potentially could be exposed to the outside environment, and can have devastating consequences for nearby communities.
6. 外壳结构紧凑合理、材质密度高强度好、防爆性能优良,表面塑粉附着力强具有良好的防腐能力,表面光洁,美观大方;
Shell compact structure, high density material strength, Explosion-proof performance, the surface of plastic powder adhesion ability with good anti-corrosion, the surface smooth, elegant appearance;
7. 他们发现棕色的外壳由大量的沟状结构组成,它们能把太阳光转换成散射光线。
They found that the brown shell is made of an array of grooves that split sunlight into diverging beams.
8. 飞机的钢结构被用作承重墙,而轻量级的铝外壳和飞机翅膀则被回收利用成屋顶材料和外墙。
The plane"s steel structure was used for load-bearing walls, while the light-weight aluminum shell and wings were reappropriated as roofing material and exterior walls.
9. 但是因为他们不能在外壳上准确地模拟复杂的纳米结构,因此太阳能的捕获率很低。
But because they were unable to precisely model the complex nanostructures found in the shell, the solar cell had a low conversion rate.
10. 一个圆柱体外壳的曲度变形情况受到其本身的结构限制和不确定的外力影响,一般可以通过数据模型方程序测算出它的结果。
Cylinder buckling is governed by imperfections in a structure and uncertainties in the loading of weight, and mathematical models can predict this behavior.
11. 这个外壳仅仅是一个模板,它有网站的引导结构。
The shell is nothing but the template, and it has the navigational structure of the site.
12. 这一结构被夹在由导电材料制成的具有电极作用的内环和外环之间,整个结构的外围是又一层聚碳酸酯外壳。
This is sandwiched between inner and outer rings of conducting material that act like electrodes, and the whole thing is surrounded by yet another layer of polycarbonate as cladding.
13. 基于网络的培训:为基于既定体系结构的课程创建外壳;设计动画,测验,和其他网络交互。
WBT: Create a shell for the course based on the determined architecture; design animations, quizzes, and other Web-interactions.
14. 博物馆依然在建,但已经给人留下深刻的印象:混凝土和玻璃构筑的冲天状结构,包裹着木质结构,其外壳好似一艘朝天空方向航行的大船。
Even under construction, the museum is impressive: a soaring structure of concrete and glass, wrapped around a large wooden form like the hull of an upturned ship.
15. 建筑物的结构由两种对比强烈的元素构成:严谨的几何立方体外壳造型以及内部中央自由的布局。
The edificial structure consists of two formally contrasting elements: A geometrically stringent, cube-like shell volume and a freeform positioned centrally in the interior.
16. GS系列机型的外壳都采用牢固的焊接钢结构,具有广泛的通用性。
The out-shell of GS Series Toughened Breaking Machine has applied strong welding steel structure , it has wide universality.
17. 电子设备的机械结构。室外外壳。第2部分:分规范。箱和壳体的协调尺寸。
Mechanical structures for electronic equipment - Outdoor enclosures - Part 2: sectional specification - Coordination dimensions for cases and cabinets.
18. 以冲击加速度为主要数据,分析了改变内壳板厚、外壳板厚、肋骨尺寸、肋骨间距等结构参数对冲击响应的影响。
Analysis regarded impact acceleration as key data to change structural parameters, such as thickness of external and internal shells, dimensions of rib, and rib intervals.
19. 第三名在叠叠量体与轻透挺立的外壳中,尊生态环境、结构行为、空间功能考虑深入。
Third Prize: Within the stacked volumes and light, porous and tall shell, the ecosystem, structure and functions of the tower have all been carefully considered.
20. 针对离合器外壳的结构特点,制定了该零件的成形工艺。
Regarding the characteristic structure of the clutch shell, the forming technology of the part is insured.
21. 该模具结构简单,生产效率高,只需更换模具中少数零件即可制造出尺寸不同的各种电池外壳。
This die has simple structure and high production efficiency, and is easy to be adjusted to manufacture shells of different sizes.
22. 根据电机外壳的特点,分析、确定落料的工艺和模具结构,解决落料件的材料变薄和起皱等问题。
The blanking technology and die structure are both analyzed and confirmed according to the characters of motor shell, as the result, the problems like material thinning and wrinkling are solved.
23. 电搭接是指用金属编织线或金属片将机载设备的外壳与飞机基本结构连接起来,使两者处于一个共同的电位点。
Electric bonding means connected aircraft equipment case and structure by braided strap or jumper in order to obtain same electric potential.
24. 该结构采用高强度材料作为外壳,以轻质材料放置于易沉滑的部位,以松散材料填充坝体。
This structure uses the high strength material as its shell, the light material is positioned in the place easily sinking and sliding, and the loose material is filled in the body of the embankment.
25. 该建筑的设计理念阐述分为三个部分:第一,其钢结构和不锈钢外壳的穹顶;
The architectural concept articulates the building into three parts: first, the dome with its steel structure and stainless-steel outer envelope;
26. 该建筑的设计理念阐述分为三个部分:第一,其钢结构和不锈钢外壳的穹顶;
The architectural concept articulates the building into three parts: first, the dome with its steel structure and stainless-steel outer envelope;
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
