跨环用英语怎么说,跨环的英文翻译


词语导航

基本信息

词语:跨环

繁体:跨環

拼音:kuà huán

英语翻译

【化】 transannular

分词翻译

跨的英语翻译:

bestrad; cut across; step; straddle; stride
【机】 amphi-

环的英语翻译:

annulus; hem in; link; loop; ring; surround
【计】 ring up; toroid
【化】 ring
【医】 annuli; anulus; band; circle; circulus; cycle; cyclo-; gyro-; loop; orb
ring; verge

翻译例句

1. 对于环向裂缝,用两换能器的连线斜跨环向裂缝的布置方法可以基本消除钢筋的影响。

As for the circular crack, the influences of the adjacent bars on the measured results can be avoided by obliquely setting two transducers across the crack.

2. 跨多个等同位置的可用性进行单一环境分割。

Single environment split across multiple identical sites for availability.

3. 此外,对不同边界条件,矢跨比以及不同截面的铺钢板肋环型网壳进行稳定分析,发现许多有规律的现象。

In addition, many laws have been discovered after the analysis of different boundary conditions, height-span radios and sections of the Latticed Dome with Steel Plates.

4. 大跨径钢桥面铺装用环氧沥青混凝土对集料有很高的要求。

High quality aggregates are needed in the construction of Epoxy asphalt concrete for long-span steel bridge deck pavement.

5. 精密测量法包括环规测量法、高度测量法、跨棱测量法等;

The precision measurement methods are further grouped into the ring gauge measurement, the high gauge measurement and the stride edge gauge measurement.

6. 通过对环氧沥青混凝土性能的分析,得出了环氧沥青混凝土在大跨径钢桥桥面铺装中应用的可行性,并结合实际研究了环氧沥青混凝土的配制和施工工。WWw.WENtIYI.com

Based on analyzing the performance of epoxy asphalt concrete, the epoxy asphalt concrete as the deck paving in the big span steel bridge can be used.

7. 空隙率是沥青路面施工质量控制中的关键技术指标之一,由于环氧沥青混凝土大多用在大跨径钢桥面铺装中,因此,对空隙率的要求更为严格。

Air void is one of the key indexes in the quality control of asphalt pavements. It is more strictly restricted to use epoxy asphalt concrete on deck pavement of long-span Bridges.

8. 因此,国内从南京长江二桥开始,在大跨径钢箱梁桥面铺装工程中引进并开展环氧沥青混凝土技术的研究与推广应用工作。

Therefore, the research on epoxy asphalt concrete for long-span steel deck pavement was introduced into china by the steel deck pavement of 2nd Nanjing Yangtse River Bridge.

9. 花边跨连续运行的底部(灰色部分)和目的是馈入两个底部鞋眼和鞋环。

The lace runs straight across the bottom (grey section) and the ends are fed into both bottom eyelets.

10. 介绍了激光表面微造型新工艺新方法,对机械密封环端面进行跨尺度的几何形貌加工工艺研究。

A new technology of laser surface micro-molding is introduced, and the mechanical face seal ring cross-scale processing of the geometric shape is researched.

11. 介绍了激光表面微造型新工艺新方法,对机械密封环端面进行跨尺度的几何形貌加工工艺研究。

A new technology of laser surface micro-molding is introduced, and the mechanical face seal ring cross-scale processing of the geometric shape is researched.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!