
词语导航
基本信息
词语:基准信号
繁体:基準信號
拼音:jī zhǔn xìn hào
英语翻译
【计】 reference signal
分词翻译
基准的英语翻译:
criterion; datum; norm; standard
【计】 base; baseline; BM
【经】 reference frame
信号的英语翻译:
semaphore; signal
【计】 semaphore; signal
【化】 sign; signal
【医】 signal
【经】 call letter; signal
翻译例句
1. 发动机转速信号同时也作为点火基准信号。
The engine speed is also used as ignition reference signal.
2. 另外主轴上还装有光电传感器,用来产生基准信号。
In addition, the spindle is equipped with a photoelectric sensor to generate the reference signal.
3. 检测光电基准信号采用无触点开关 ,使用寿命长 。
Non-contact switch is adopted for photo detection, featuring long service life.
4. 其输出的基准信号稳定,与电源电压、温度以及工艺的变化无关。
Reference source outputs a stable reference signal which is independent of power supply voltage, temperature and process.
5. 分析了基准信号相位发生误差的原因,并给出了相位误差的分布情况。
The reasons to the error of phase of postulate signal are analyzed and the distribution of the drift of phase is given.
6. 该系统用高稳定度铷钟作为时间基准信号,实现了无源导航定位功能。
Rubidium atomic clock is used for the time reference signal in the system, by which the user can get the positioning information without sending any signal.
7. 在两个反射镜上安装光电探测器,使之转一周产生一个脉冲信号作为基准信号。
Fixed photoelectric detectors on the two reflectors, they produce a pulse signal as reference signal every round.
8. 软件部分主要对曲轴速度信号、凸轮轴基准信号等进行处理计算,输出点火控制信号。
The software mainly processes the rotate speed signal of the crankshaft and camshaft position signal to export ignition control signal.
9. 实践证明该法具有传感器安装方便、转换电路简单、价格低廉且获得的基准信号稳定可靠等优点。
It has proved that there are following advantages: the sensor is easy to install, the circuit is simple to switched. the cost is low and the obtained reference signal is reliable.
10. 采用基准信号作触发,分别对内、外转子进行同步采样,就可直接获取各转子相应的振动幅值和相位。
Magnitudes and phase values of unbalanced weights are obtained directly by sampling the vibration signal synchronized with reference signal.Www.WenTIyi.cOm
11. 通过分析可知,只要晶振频率足够高,生成的基准信号就有足够高的精度,而且信号的参量具有良好的可调节性。
Analysis result shows that the reference signal can be highly precise and provide an adjustable performance if the given frequency of crystal is high enough.
12. 在比较分析的基础上介绍了选择光电传感器法作为智能动平衡仪获得基准信号的方案,并将此方案成功应用于智能化整机动平衡仪中。
The photoelectric sensor is selected as reference signal obtained from intelligent dynamic balance instrument. The method is successfully used in intelligent overall dynamic balance instrument.
13. 上述为方案的大体流程,其中具体实现参数,比如交织深度、基准信号对应的信道的选取等一些参数要依具体应用而定,使系统性能达到最佳。
Some parameters such as the depth of interleaving and selection of sub-channels can be planned depending on the reality to achieve the optimization.
14. 上述为方案的大体流程,其中具体实现参数,比如交织深度、基准信号对应的信道的选取等一些参数要依具体应用而定,使系统性能达到最佳。
Some parameters such as the depth of interleaving and selection of sub-channels can be planned depending on the reality to achieve the optimization.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
