词语导航
基本信息
词语：故障报警
繁体：故障報警
拼音：gù zhàng bào jǐng
英语翻译
【计】 failure warning; malfunction alert
分词翻译
故障的英语翻译：
breakdown; fault; hitch; malfunction; stoppage; trouble【计】 booboo; F; failure; fault; malfunction
【化】 malfunction
【经】 breakdown; trouble
报警的英语翻译：
call the police; give an alarm【计】 alerting
翻译例句
1. 故障报警以及、洗涤完成报告等。
Failure Alarm, as well as, washing complete the report.
2. 设有在线故障关机、故障报警功能。
With line fault shutdown, fault alarm.
3. 有些故障报警会在故障消失后自动清除。
Some Device Alerts are automatically reset if the triggering condition disappears.
4. 设有各种故障报警装置。
There are various kinds of trouble warning devices.
5. 自动故障报警装置，显示故障，及时报警。
Auto fault-alarming device to show the fault and alarm on time.
6. 自动显示故障报警，安全防护门，安全开关。
Automatic shows error, safety shield; safety switch.
7. 有温度越限和故障报警及打印记录和大屏幕显示。
It has overtemperature and trouble alarm, printing record and large screen display.
8. LED灯以不同频率闪烁指示不同的故障报警状态。
LED flashing at different frequencies indicate the different alarm status.
9. 电源不怕开路、短路、有故障关机、故障报警的功能。
Power supply are not afraid of open circuit, short circuit, faulty shutdown, fault alarm functions.
10. 指示：发电机组电源指示、供电指示、各类故障报警指示；
Instructions: generator power indicator, power indication, all kinds of fault alarm indication;
11. 故障计数标志开始累积，当达到设定的累积量后，故障报警。
The trouble counter starts accumulating, and failure warning sets in when reaching the pre-set cumulant.
12. 该系统具备正常启动、安全保护及仪表显示和故障报警等功能。
The system had the functions of normal starting, safety protection, instrument display and breakdown.
13. 作为火警控制器火灾报警信息、故障报警的信息的延伸显示设备。
It is intend for display information of the fire alarm and failure alarm.
14. 智能化设计，PLC自动处理故障报警、记数、检测和停机等动作。
Intelligent design with PLC managing trouble alarm, counting and necessary inspection.
15. 现场运行表明，该语音报警卡完全可以满足故障报警的实时性和可靠性要求。
Practice proves that it satisfies the requirements of real time performance and reliability.
16. 电器系统最大限度采用进口原件，并具有多项故障报警功能，故障少，排除方便。
Electrical system to maximize the use of imported original, and has a number of fault alarm function, less trouble, easy to remove.
17. 电器系统最大限度采用进口原件，并具有多项故障报警功能，故障少，排除方便。
The electrical system has mainly applied imported parts, it has multiple alarm system, there are few problems which can be easily eliminated.
18. 该系统具有故障报警及专家诊断系统，从而实现了电台管理的自动化和远程网络化。
The system integrates network and multimedia technique into itself and provides the subsystems of malfunction alert and expert diagnostic system.
19. 通过检测PLC的应答信息，解决工控机与PLC之间通信的数据效验和故障报警难点；
Through inspection of response of PLC, the problems of dada efficacy and malfunction alarm in ICC-PLC communication are solved;
20. NOC可以收到系统故障报警或者在Nagiosweb界面上看到一个闪亮的红色错误指示灯。
The NOC can be alerted of system failures or see a shiny red error light on the Nagios Web interface.
21. 同时，运梁车还具有自动辅助驾驶、遥控、定位和防撞、故障报警与诊断等智能化系统。wwW.wENTIyI.cOm
At the same time, girder transport vehicle also has such intelligent systems as automatic assistance driving, the remote control, positioning, anti-collision, fault alarm and fault diagnosis etc.
22. 通过研究故障报警和数据分析，提高响应速度，缩短解决问题时间，分析出故障多发工位。
In order to achieve the purpose of improving the response speed and shortening the settlement time, this paper studied the fault alarm and data analysis.
23. 人性化的操控系统具有智能化保护功能，遇到故障报警并显示故障原因，确保生产过程的安全。
The humanization control system has intelligent protection functions. In case of fault alarm, it will display the reasons for faults to ensure the safety of production process.
24. 最终查出造成机组事故的根本原因是可控硅励磁装置供电电源无工作状态监视信号及故障报警信号；
The final basic cause that resulted in the failure is no working state monitoring signal and failure warning signal of power supply source of controlled silicon excitation device.
25. 研究成果，为故障报警与控制提供了保障，报警与控制结合，提高了提升机盘闸制动系统的安全性。
This guarantees the implementation of alarming and controlling when the fault happens. The integration of alarm and control promotes the safety of the hoisting machine disc braking system.
26. 这些保护开关与控制系统配合，可以实现故障报警，故障停机等保护措施，以保证胶带输送机系统的安全。
The protection switches and control systems can be achieved fault alarm, fault shutdown and other protective measures to ensure the safe of tape transfer systems.
27. 采用冗余优化，自行设计实施活套编码器可调式的安装结构，开发出活套编码器的冗余切换和故障报警功能。
Be the adoption of redundancy optimization, self-designed adjustable installation structure of loop coder, redundancy switching and fault warning functions of the loop coder were developed.
28. 故障报警，故障内容，发生故障和排除故障的时间全部存档，并由系统支援提出可能排除故障的建议(专家系统)。
The alarm and failure messages that are filed with the time the failure appeared and has been eliminated, are supported by the system proposing possibilities to eliminate the failure (expert system).
29. 采用彩色CRT和传统操作台，对整个工艺及设备的运行状态进行在线监视，同时完成故障报警、记录与阶段性报表生成。
The on-line monitoring of whole line operation is performed by color CRT and Traditional operation consoles, and at same time, alarming, record, and report is functional.
30. 本文应用数字PID控制算法设计了控制系统的软件，实现了实时控制、动态显示、数据记录、参数调整以及故障报警等控制功能。
In this article, a control system software is designed using digital PID algorithm, which realize real-time control, dynamic display, data record, parameter modulation and malfunction alert etc.
版权声明：问题易所有作品（图文、音视频）均来源网络，版权归原创作者所有，与本站立场无关，如不慎侵犯了你的权益，请联系我们告知，我们将做删除处理！