喷嘴用英语怎么说，喷嘴的英文翻译

词语导航

基本信息

词语：喷嘴

繁体：噴嘴

拼音：pēn zuǐ

英语翻译

nozzle
【计】 jet nozzle
【医】 nozzle; nozzle spray

相关词条

1.injectingnozzle  2.jetapparatus  3.nosepiece  4.sprayhead  5.dischargejet  6.airspout  7.jet  8.reactionnozzle  9.spraynozzle  10.injectionnozzle  11.orifice  12.ejectionnozzle  13.spraypipe  14.burnerorifice  15.spongingnozzle  16.exitnozzle  

分词翻译

喷的英语翻译：

gush; spew; spout; spray; sprinkle; spurt

嘴的英语翻译：

mouth; nib
【医】 beak; nozzle; rostra; rostrum

翻译例句

1. 它的喷嘴上涂了种润滑油。

Its nozzle was smeared with some kind of lubricant.

2. 如果他把手指按在喷嘴上，就可以产生强力的喷射。

If he put his finger over the nozzle he could produce a forceful spray.

3. 这种袋带有一个喷嘴，里面装满了一种能够变成胶状的粉末物质。

The bag is attached to a spout and filled with a powdered substance that turns into a gel.

4. 这位技术人员试图用微型喷嘴搅拌液体，以确保最大的热量交换，从而为个人电脑提供更好的冷却效果。

The technician attempts to produce better cooling in personal computers by stirring up the liquid with tiny jets to make sure maximum heat exchange.

5. 一种将颜料喷成雾状的喷嘴管。

A nozzled tube used to apply paint in a spray form.

6. 但光有喷嘴是不够的。

But a nozzle alone is not enough.

7. 在喷嘴的理论，流量是假设为一维。

In nozzle theory, flow is assumed to be one-dimensional.

8. 喷嘴：真正产生压力的是喷嘴。

The nozzle: The nozzle is what actually creates the pressure.

9. 可能有个水眼(喷嘴)堵了。

One nozzle may be plugged.

10. 喷嘴芯是压力型雾化喷嘴的关键部件。

Nozzle core is the key part of the pressure atomization nozzle.

11. 我注意到一位女士在车间里正往塑料软管上装喷嘴。

I noticed a woman on the factory floor putting nozzles onto rubber hoses.

12. 主进料口弧度尺寸与注塑机喷嘴弧度相配。

D. The material - radian size and injection plastic machine nozzles radian match.

13. 首先这种机器启动后加热朝下的喷嘴，会在地上盘旋。

First the machine takes off and hovers above the ground by firing downward-facing nozzles.

14. 实际上，涡轮圆盘和喷嘴是装在机壳里的。

In practice, the turbine disc and the nozzles are fitted into a casing.

15. 空气雾化喷嘴特别适用于粘性液体的雾化。

Air atomizing nozzles are especially suited to the atomization of viscous liquids.

16. 而且所使用的喷嘴与电极有较高的使用寿命。

And the use of nozzle with electrodes have higher service life.

17. 同时，喷嘴和压力舱壁的设计，减少了重量。WWW.wentiYI.coM

As well, the nozzle and pressure bulkhead are designed for reduced weight.

18. 将软管和喷嘴安装到这种装置的出口(图1)。

Attach a hose and nozzle to the outlet of the device (Fig. 1).

19. 最基本的轮廓，可以被视为一个喷嘴是一个截断锥。

The most basic contour that can be considered for a nozzle is a truncated cone.

20. 小喷嘴：雾化喷嘴是水雾除尘系统的关键部分之一。

Small nozzle: Atomizer mist dust removal system is a key part of.

21. 我们要采购喷嘴，水管，联结和有柔性的扩充连接风箱。

We want to buy Nozzles, Hoses, Coupling and Flexible Expansion Joints Bellows and Expansion Joints.

22. 可按照要求进行模具，喷嘴或其它机械附件的常规改变。

May make routine changes of dies, nozzles or other machinery attachments as required.

23. 本文所提出的计算方法可用于离心式喷嘴雾化参数的预估。

The calculating method in this paper can be used to preestimate spray parameters of pressure-swirl atomizer.

24. 这个等式是其中一个最有用，因为它允许喷嘴出口速度计算。

This equation is one of the most useful, as it allows the nozzle exit velocity to be calculated.

25. 找把加热枪，那种来剥除油漆的，把它的喷嘴对准疑似窝点，一阵炮轰。

Get a heat gun, the one used for stripping paint, Angle its nozzle toward suspected colonies, and blast away.

26. 单孔喷嘴射流计算的核心长度和高精度的测量结果是一致的。

Of length of core of calculative of efflux of weak opening nozzle and high accuracy measuring an outcome is consistent.

27. 投入，简直是名单推进剂成分，以及商会的压力和喷嘴出口的压力。

Input is simply a list of propellant ingredients, as well as chamber pressure and nozzle exit pressure.

28. 专家说，这样有助于保持喷嘴处于打开状态，减少维护需求和周期。

Experts say this helps to keep the inkjet nozzles open and reduces the need for maintenance and maintenance cycles.

29. 另外，过大的切割速度和过大的喷嘴高度都会引起切口上下宽度差的增加。

In addition, too much cutting speed and big nozzle height can cause and the increase of the poor incision width.

30. 另外，过大的切割速度和过大的喷嘴高度都会引起切口上下宽度差的增加。

In addition, too much cutting speed and big nozzle height can cause and the increase of the poor incision width.