阳极化用英语怎么说,阳极化的英文翻译


词语导航

基本信息

词语:阳极化

繁体:陽極化

拼音:yáng jí huà

英语翻译

【化】 anodization

相关词条

1.anodizing  2.anodictreatment  

分词翻译

阳的英语翻译:

in relief; male genitals; open; overt; positive; this world
【机】 male

极化的英语翻译:

【化】 polarization
【医】 polarization; polarize

翻译例句

1. 等一会儿就开始打破阳极化层。

It takes a while for it to start breaking through the layer.

2. 或者是由不锈钢或阳极化铝制成。

Constructed of either stainless steel or anodized aluminum.

3. 硬质阳极化电源是对金属表面进行处理的装置。

Hard anodizing power supply is an important part of the equipment to deal with metal surface.

4. 阳极化设备,阳极化系统,及基体处理设备和方法。

Anodization apparatus, anodization system, and apparatus and method for treating matrix thereof.

5. 阳极化设备,阳极化系统,及基体处理设备和方法。

Anodizing apparatus, anodizing system, substrate processing apparatus and method.

6. 阳极化处理表面的一个主要缺点是它的导热性非常低劣。

One major disadvantage of anodized surfaces is their very poor thermal conductivity.

7. 氟碳丙烯酸保护涂料能够满足铝合金阳极化绝缘保护的要求。

In general, the fluorocarbon protecting coating could be well applied for the anodising insulation protection of Al alloy.

8. 本文还对等离子体显影、阳极化、聚合及PCVD等作了简要讨论。

The plasma development, anodization, polymerization and PCVD are discussed briefly.

9. 采用适当的电镀技术诸如阳极化和附加阴极技术可以控制镀层的厚度和范围。

Proper use of special plating techniques, such as conforming anodes and robbers, can control plating thicknesses and runouts.

10. 采用不锈钢和阳极化处理的航天等级高强度铝合金为材料,坚固、耐用,寿命长。

Material is stainless steel and high intensity aviation grade aluminum alloy through anodization, firm and durable, long service life.

11. 采用S-N曲线研究硫酸阳极化、铬酸阳极化和硼酸硫酸阳极化对航空铝合金疲劳极限的影响。

The effect of sulfuric acid, chromate acid and boric/sulfuric acid anodizing on fatigue performance of aeronautic aluminum alloys was studied by using S-N curve.

12. 我们公司生产的侧壁通风管道的格子窗框架和刀刃采用6063型号的挤制铝材,用200-R1阳极化抛光。

Frame and blades are 6063 extruded aluminum alloy with 200-R1 satin anodized finish.

13. 分析了液压油箱壳体大盲孔的加工难点,介绍了硬质阳极化后光整加工大盲孔的工艺方法及取得的技术经济效果。

In this paper, the difficulties, which appear in the processing of big diameter blind holes in hydraulic oil tank case, are analyzed.

14. Z轴采用表面阳极化航空铝合金,温度一致性极佳;并降低了运动部件的质量,减少测量机在高速运行时的惯性。

Cross beam and Axis Z are made of surface-anodized aerometal to improve thermal stability and reduce moving mass for faster setting.

15. 论述了国外铸造镁合金的发展趋势,其中重点讨论了包括无熔剂熔炼在内的新的铸造工艺以及非铬酸阳极化表面处理工艺。WWw.wEnTiYi.com

This article discusses the developments of cast magnesium alloys. New casting technologies including fluxless melting and nonchromated anodisation surface treatments are emphasised.

16. 本工艺有效地抑制了铝合金中铜的腐蚀,实现了铝阳极化在LY 12、LY 11上的应用,经中试后具备了批量生产能力。

Coppor corrosion in al alloy was restrained, resulted in the realization of applying Aluminium anodizing to LY12and LY11. This technology can be put into batch production.

17. 为确保达成公司已有的产品质量标准,对阳极化,振动,超声波处理和其他表面处理线的生产设备进行参数设置,调整和故障解决。

Sets up, adjusts and troubleshoots for anodize, vibratory, ultrasonic cleaning and other finishing operation equipment in order to achieve company established quality standards on products.

18. 采用极化曲线测试结合扫描电子显微镜分析技术,研究了退火对铝合金阳极的活性的影响。

The effects of annealing on the activity of al alloy anode were studied by measurement of polarization curves and analysis of SEM.

19. 重铬酸根与磁场对铁在硫酸溶液中阳极极化行为的影响。

Effect of magnetic field and dichromate on anodic polarization behavior of iron in sulfuric acid.

20. 在阳极极化试验中,当钢样的电位极化到点蚀电位或点蚀电位以上,钢中的夹杂物几乎都会活化而诱发点蚀。

In the polarization test, almost all inclusions can be active and initiate pitting when the potential of steels is equal to or higher than the pitting potential.

21. 可作为评价材料点蚀敏感性指标,要比传统指标(如点蚀电位和阳极极化曲线滞后环面积等)更加优越。

They had superiority as the indexes of materials pitting sensitivity than the traditional indexes such as, the pitting potential, the lag ring area in scan anodic.

22. 用X射线衍射和阳极极化曲线分析了热处理对镀层耐蚀性的影响。

The influence of heat treatment on the corrosion resistance of coating was analysed by XRD and anode polarization curve.

23. 方法:采用动电位极化技术,分别测定激光焊接及脉冲氩弧焊接TA2和TC4后,材料阳极极化曲线的变化。

Methods: Electrochemical technique was adopted to detect the changes of anode polarization curves of TA2 and TC4 after welding with laser or pulsed tungsten argon arc.

24. 用电化学方法测得了带锈样的阳极极化曲线。

The anode polarization curves of testing steel were measured by electrochemical methods.

25. 采用动电位扫描法对成膜碳钢试样测试的阳极极化曲线显示,碳钢在腐蚀介质中处于钝化状态。

The anticathode of polarization curve of carbon steel with SAMs by changed - electrical voltage method suggested that carbon steel is passivation state in the rust medium.

26. 采用阳极极化和电化学阻抗谱(EIS)技术研究了AZ31镁合金的电化学腐蚀行为。

The electrochemical behavior of AZ31 Mg alloy was investigated by measuring anodic polarization curves and electrochemical impedance spectroscopy(EIS).

27. 通过电化学腐蚀测试测出阳极极化曲线,分析了在不同环境和溶液中的耐腐蚀性能。

Anode polarization curves were measured by electrochemistry corrosion and resisting causticity was analyzed in different condition and solution.

28. 通过电化学腐蚀测试测出阳极极化曲线,分析了在不同环境和溶液中的耐腐蚀性能。

Anode polarization curves were measured by electrochemistry corrosion and resisting causticity was analyzed in different condition and solution.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!